| 基于Pro/Engineer的挤出机螺杆三维参数化模块开发 |
| |
| 引用本文： | 王明君,文劲松. 基于Pro/Engineer的挤出机螺杆三维参数化模块开发[J]. 塑料科技, 2009, 37(5) |
| |
| 作者姓名： | 王明君 文劲松 |
| |
| 作者单位： | 华南理工大学聚合物新型成型装备国家工程研究中心,广东,广州,510640 |
| |
| 摘 要： | 采用参数化设计的方法,在Pro/E中进行二次开发,建立了单螺杆元件的参数化造型和装配模块。利用此模块,用户可以快速地创建单螺杆模型,进行CAE分析。
|
| 关 键 词： | 二次开发 参数化设计 单螺杆元件 Pro/Engineer |
3D Parametric Module Development of Screw of Extruder Based On Pro/Engineer |
| |
| Wang Mingiun,Wen Jinsong. 3D Parametric Module Development of Screw of Extruder Based On Pro/Engineer[J]. Plastics Science and Technology, 2009, 37(5) |
| |
| Authors: | Wang Mingiun Wen Jinsong |
| |
| Abstract: | Taking the method of parametric design,the secondary development in Pro/E was applied to establish a parametric model and assembly module of single screw element.By means of this module,the designer could create the single screw model quickly,and perform the CAE analysis efficiently. |
| |
| Keywords: | Pro/Engineer |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
