Reaction of sodium calcium borate glasses to form hydroxyapatite

This study investigated the transformation of two sodium calcium borate glasses to hydroxyapatite (HA). The chemical reaction was between either 1CaO · 2Na₂O · 6B₂O₃ or 2CaO · 2Na₂O · 6B₂O₃ glass and a 0.25 M phosphate (K₂HPO₄) solution at 37, 75 and 200 °C. Glass samples in the form of irregular particles (125–180 μm) and microspheres (45–90 and 125–180 μm) were used in order to understand the reaction mechanism. The effect of glass composition (calcium content) on the weight loss rate and reaction temperature on crystal size, crystallinity and grain shape of the reaction products were studied. Carbonated HA was made by dissolving an appropriate amount of carbonate (K₂CO₃) in the 0.25 M phosphate solution. X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy were used to characterize the reaction products. The results show that sodium calcium borate glasses can be transformed to HA by reacting with a phosphate solution. It is essentially a process of dissolution of glass and precipitation of HA. The transformation begins from an amorphous state to calcium-deficient HA without changing the size and shape of the original glass sample. Glass with a lower calcium content (1CaO · 2Na₂O · 6B₂O₃), or reacted at an elevated temperature (75 °C), has a higher reaction rate. The HA crystal size increases and grain shape changes from spheroidal to cylindrical as temperature increases from 37 to 200 °C. Increase in carbonate concentration can also decrease the crystal size and yield a more needle-like grain shape.