首页 | 本学科首页   官方微博 | 高级检索  
     

薄板坯连铸连轧取向硅钢流程中Cu_2S抑制剂的析出行为
引用本文:项利,岳尔斌,仇圣桃,赵沛.薄板坯连铸连轧取向硅钢流程中Cu_2S抑制剂的析出行为[J].钢铁,2009,44(11).
作者姓名:项利  岳尔斌  仇圣桃  赵沛
摘    要:研究了Cu2S抑制剂在薄板坯连铸连轧流程生产取向硅钢全流程中的析出特点。结果表明:典型成分取向硅钢主抑制剂Cu2S在全工序进程中析出粒子呈不断长大的趋势,粒子分布密度与体积分数在高温退火前也不断增加,高温退火净化后,剩余粒子变大,分布密度大大降低,对应体积分数也降低。

关 键 词:取向硅钢  薄板坯连铸连轧  抑制剂  Cu_2S  析出

Precipitation of Inhibitor (Cu_2S) in Experimental Grain Oriented Silicon Steel Made by Thin Slab Casting and Rolling Process
Abstract:The whole process's precipitated characteristics of inhibitor (Cu_2S) in the grain oriented silicon steel pro-duced by the thin slab casting and rolling process were studied. The results indicate that the main inhibitor (Cu_2S)of CGO steel with typical composition continuously grows in the whole process; The distribution density and volume fraction of Cu_2S continuously increase before the high temperature annealing process; After the purification treat-ment in high temperature annealing process, residual Cu_2S grows and the distribution density and volume fraction of Cu_2S decreased greatly.
Keywords:grain oriented silicon steel  thin slab casting and rolling  inhibitor  Cu_2S  precipitation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号