| 静叶片钢冷轧变形的研究 |
| |
| 引用本文： | 张强 栗守维. 静叶片钢冷轧变形的研究[J]. 特殊钢, 1993, 14(5): 7-9 |
| |
| 作者姓名： | 张强 栗守维 |
| |
| 作者单位： | 东北大学(张强，栗守维)，东北大学(骆宗安) |
| |
| 摘 要： | 本文对１Ｃｒ１１ＭｏＶ静叶片钢进行了冷轧变形的研究。确定了宽展面积与压缩面积的关系，各道次的宽展面积与压缩面积比值，宽展与压下量的关系，以及压下量沿轧件宽向的分布。为选择坯料外形和尺寸，孔型设计以及制定压下制度提供依据。
|
| 关 键 词： | 1Cr11MoV钢 冷轧 变形 研究 |
Study on Cold Rolling Deformation of Steel for Stator Blade |
| |
| Zhang Qiang,Li Shouwei,Luo Zongan. Study on Cold Rolling Deformation of Steel for Stator Blade[J]. Special Steel, 1993, 14(5): 7-9 |
| |
| Authors: | Zhang Qiang Li Shouwei Luo Zongan |
| |
| Affiliation: | Northeastern University |
| |
| Abstract: | The cold rolling deformation of steel 1Cr11MoV for statorblade was investigated,and the relation between area of spread and compression,spreading and reducing, the ratio of spreading area and compressing area at each pass, and the distribution of reduction along with the width of rolling stok were determined. The data obtained are available for shape and dimension selecting of rolling stock, roll pass designing and rolling reduction scheduling. |
| |
| Keywords: | Area of Spread Area of Compression Spreading Reducing |
| 本文献已被 CNKI 维普 等数据库收录！ |
