首页 | 本学科首页   官方微博 | 高级检索  
     

支承电压与电压变化速率对静电轴承性能影响的研究
引用本文:韩丰田,高钟毓,王永梁.支承电压与电压变化速率对静电轴承性能影响的研究[J].机械工程学报,2003,39(3):130-133.
作者姓名:韩丰田  高钟毓  王永梁
作者单位:清华大学精密仪器与机械学系,北京,100084
基金项目:国防基础与应用研究“十五”预研项目(41309020)。
摘    要:从机电耦合的角度研究了静电轴承中高压放大器的输出电压和电压变化速率对系统性能的影响。分析表明,支承电压的选择应结合承载能力、转子不平衡力抑制和对输出电压惰性失真的要求确定,支承电压变化速率与高压放大器的动态功耗相互制约。导出了确定支承电压及其变化速率的关系式,为系统设计提供了理论依据。理论分析结果与实例的试验结果取得了较好的一致性。

关 键 词:静电轴承  静电力  高压放大器  支承电压  电压变化速率
修稿时间:2001年8月20日

INFLUENCES OF SUSPENSION VOLTAGE AND ITS SLEW RATE ON THE PERFORMANCE OF ELECTROSTATIC BEARINGS
Han Fengtian Gao Zhongyu Wang Yongliang.INFLUENCES OF SUSPENSION VOLTAGE AND ITS SLEW RATE ON THE PERFORMANCE OF ELECTROSTATIC BEARINGS[J].Chinese Journal of Mechanical Engineering,2003,39(3):130-133.
Authors:Han Fengtian Gao Zhongyu Wang Yongliang
Affiliation:Tsinghua University
Abstract:Electrostatic bearings are subject to performance limits which are commonly resulted from the limited suspension voltage and its slew rate supplied by high-voltage amplifiers. The choice of the suspension voltage has to satisfy various demands and its final solution, according to the analytical results, is determined by the requirements of load capacity, unbalanced force suppression, and voltage distortion. Meanwhile, the force slew rate which is limited by the power consumption of high-voltage amplifiers introduces nonlinear behaviors. The problem of identifying the suspension voltage and its slew rate when used in an electrostatic bearing with a known structure subject to a known load is solved by the derived equations.
Keywords:Electrostatic bearing Electrostatic forceHigh-voltage amplifier Suspension voltage Voltage slew rate
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号