首页 | 本学科首页   官方微博 | 高级检索  
     

一种新型Cu基自蔓延焊接接头组织和性能
引用本文:胡军志,马世宁,陈学荣,罗林. 一种新型Cu基自蔓延焊接接头组织和性能[J]. 焊接学报, 2006, 27(10): 94-96
作者姓名:胡军志  马世宁  陈学荣  罗林
作者单位:装甲兵工程学院,装备再制造技术国防科技重点实验室,北京,100072
摘    要:针对在野外条件下金属零部件的焊接应急修理困难的问题,以CuO Al系铝热剂反应为放热源,开发了一种新型Cu基自蔓延焊接材料,对其焊缝的组织形貌及性能进行了研究.结果表明,自蔓延反应后形成熔焊焊接,焊缝成形良好,焊缝与基体之间存在明显的过渡区,焊缝的抗拉强度大于200 MPa,抗弯强度接近 600 MPa,表面硬度可达HRB130,能够满足金属零部件野外应急维修需要.

关 键 词:自蔓延焊接  材料  组织  性能
文章编号:0253-360X(2006)10-094-03
收稿时间:2005-10-10
修稿时间:2005-10-10

Structure and performance of a new Cu-base SHS welded joint
HU Jun-zhi,MA Shi-ning,CHEN Xue-rong and LUO Lin. Structure and performance of a new Cu-base SHS welded joint[J]. Transactions of The China Welding Institution, 2006, 27(10): 94-96
Authors:HU Jun-zhi  MA Shi-ning  CHEN Xue-rong  LUO Lin
Affiliation:Armored Force Engineering Academy, National Key Laboratory for Remanufacturing, Beijing 100072, China,Armored Force Engineering Academy, National Key Laboratory for Remanufacturing, Beijing 100072, China,Armored Force Engineering Academy, National Key Laboratory for Remanufacturing, Beijing 100072, China and Armored Force Engineering Academy, National Key Laboratory for Remanufacturing, Beijing 100072, China
Abstract:A new cuprum-base SHS welding material was developed by SHS combustion between CuO and Al in order to solve a problem that welding mend of metal parts was difficult in field. The structure and performances of the welded joint were studied. The results indicated that the welding was fusion welding, and weld appearance is good.Transition zone was clear between base metal and weld metal. At the same time, tensile strength of the welded joint was higher than 200 MPa,and bending strength was close to 600 MPa and surface hardness was also close to HRB130. It also indicated this technology can meet the need of repair of metal parts in field.
Keywords:SHS welding  material  structure  performance
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号