首页 | 本学科首页   官方微博 | 高级检索  
     

自转清洗包塑钢丝螺旋的动力学特性试验研究
引用本文:李晓阳,俞天兰,张治坤,冯修燕,支校衡. 自转清洗包塑钢丝螺旋的动力学特性试验研究[J]. 化学清洗, 2012, 0(2): 25-27,45
作者姓名:李晓阳  俞天兰  张治坤  冯修燕  支校衡
作者单位:[1]湖南化工职业技术学院,湖南株州412001 [2]湖南工业大学,湖南株州412008
摘    要:本文围绕自转清洗包塑钢丝螺旋的动力学特性进行实验研究。钢丝螺旋的自转动力矩特性,与管内流速的关系呈现为随流速增大而增大的抛物线曲线;开始自转需要的管内流速与钢丝螺旋自身的螺旋角大小关系,则是先随着螺旋角增大而减少、后来随着螺旋角增大而增大,并且以44°螺旋角为最低;管内沿程阻力与钢丝螺旋螺距大小的关系,则是随着螺距增大而显著减少。

关 键 词:包塑钢丝螺旋  自转清洗  动力矩  结构优化  流体阻力

Experimental research on dynamic characteristics of self-cleaning and rotating steel spiral-insert with plastic coat
LI Xiaoyang,YU Tianlan,ZHANG Zhikun,FENG Xiuyan,ZHI Xiaoheng. Experimental research on dynamic characteristics of self-cleaning and rotating steel spiral-insert with plastic coat[J]. , 2012, 0(2): 25-27,45
Authors:LI Xiaoyang  YU Tianlan  ZHANG Zhikun  FENG Xiuyan  ZHI Xiaoheng
Affiliation:1.Hunan Chemical Industry Vocation Technology College,Zhuzhou,Hunan 412004,China; 2.Hunan University of Technology,Zhuzhou,Hunan 412008,China)
Abstract:This paper states the experimental research on dynamic characteristics of self-cleaning and rotating steel spiral-insert with plastic coat.The research shows that the self-rotating kinetic moment increases with flow velocity in tubes,and their relationship is a parabolic curve.The minimum flow velocity in need to drive the spiral-insert is related with the insert spiral angle.Firstly the flow velocity goes down as the angle increases,then the velocity goes up as the angle increases after the velocity reaches to the lowest when the angle is 44 degree.The flow resistance in tubes is notably reduced as the sprial pitch increases.
Keywords:steel spiral with plastic coat  self-cleaning and rotating  kinetic moment  structure optimization  flow resistance
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号