| 离心铸造过共晶Al-Si 合金自生表面复合材料 |
| |
| 引用本文： | 王渠东,丁文江,金俊泽.离心铸造过共晶Al-Si 合金自生表面复合材料[J].复合材料学报,1998,15(3):7-11. |
| |
| 作者姓名： | 王渠东 丁文江 金俊泽 |
| |
| 作者单位： | 1. 上海交通大学铸造研究所,上海,200030
2. 大连理工大学铸造工程研究中心,大连,116024 |
| |
| 基金项目： | 中国科学院资助项目，59471051， |
| |
| 摘 要： | 采用热模金属型工艺, 离心铸造过共晶Al-Si 合金, 获得了外层或外层和内层富集初晶Si, 其余部分为共晶组织构成的自生表面复合材料。分析了复合材料的形成过程, 考察了复合材料的组织、硬度和耐磨性。
|
| 关 键 词： | 离心铸造 过共晶Al-Si 合金 自生复合材料 表面复合材料 |
| 收稿时间： | 1996-12-14 |
| 修稿时间： | 1997-04-03 |
IN SITU SURFACE COMPOSITES FABRICATED BY CENTRIFUGALLY CASTING HYPEREUTECTIC Al-Si ALLOY |
| |
| Wang Qudong,Ding Wenjiang,Jin Junze.IN SITU SURFACE COMPOSITES FABRICATED BY CENTRIFUGALLY CASTING HYPEREUTECTIC Al-Si ALLOY[J].Acta Materiae Compositae Sinica,1998,15(3):7-11. |
| |
| Authors: | Wang Qudong Ding Wenjiang Jin Junze |
| |
| Affiliation: | 1. Shanghai Jiaotong University, Shanghai 200030;
2. Dalian University of Technology, Dalian 116024 |
| |
| Abstract: | In situ surface composites of hypereutectic Al-Si alloy, which possess the microstructures of accumulated primary silicon in outer layer or accumulated primary silicon in outer and inner layers and no primary silicon in the rest layer, have been achieved using preheated metal mould centrifugal casting. The formation process of the composites has been analyzed, and the structure, hardness and wear ability of the composites have been also investigated. |
| |
| Keywords: | centrifugal casting hypereutectic Al-Si alloy in situ composites surface composites |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载全文 |
