| 厚规格低合金容器板探伤不合的原因分析及对策 |
| |
| 引用本文： | 李连任,刘德红,毕于顺,陈天学.厚规格低合金容器板探伤不合的原因分析及对策[J].宽厚板,2011,17(3):25-28. |
| |
| 作者姓名： | 李连任 刘德红 毕于顺 陈天学 |
| |
| 作者单位： | 济南钢铁股份有限公司 |
| |
| 摘 要： | 通过低倍、金相及扫描电镜等手段，对厚规格低合金容器板探伤不合的内在组织进行了分析，研究探伤不合的原因，阐明了铸坯内部中心偏析、夹杂物及微裂纹是导致钢板探伤不合的内在原因。提出了降低连铸坯过热度，采用连铸末端动态轻压下技术，铸坯下线堆垛缓冷48h，钢板加保温罩缓冷48h等工艺措施，可有效提高钢板探伤合格率。
|
| 关 键 词： | 低合金中厚板 超声波探伤 偏析 微裂纹 |
Analysis on the Causes of Nonconformity in Ultrasonic Flaw Detection of Low Alloy Heavy Plate for Vessel and Countermeasures |
| |
| Li Lianren,Liu Dehong,Bi Yushun,Chen Tianxue.Analysis on the Causes of Nonconformity in Ultrasonic Flaw Detection of Low Alloy Heavy Plate for Vessel and Countermeasures[J].Wide and Heavy Plate,2011,17(3):25-28. |
| |
| Authors: | Li Lianren Liu Dehong Bi Yushun Chen Tianxue |
| |
| Affiliation: | Li Lianren,Liu Dehong,Bi Yushun and Chen Tianxue(Jinan Iron and Steel Co.Ltd) |
| |
| Abstract: | By using methods of macrostructure examination,metallographic examination and SEM,the microstructure of nonconforming low alloy heavy plate for vessel in ultrasonic flaw detection are observed and analyzed.The cause of nonconforming steel plate in ultrasonic flaw detection are studied.It is explained that central segregation,inclusions and microcrack inside the strand are internal causes of nonconformity in ultrasonic flaw detection on the plate.Many technological measures of lowering degree of overheat,usi... |
| |
| Keywords: | Low alloy heavy plate for vessel Ultrasonic flaw detection Segregation Microcrack |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
