| 港口桥吊用钢丝绳断丝原因分析 |
| |
| 引用本文： | 巴发海,李玲,陆洲.港口桥吊用钢丝绳断丝原因分析[J].机械工程材料,2009(12). |
| |
| 作者姓名： | 巴发海 李玲 陆洲 |
| |
| 作者单位： | 上海材料研究所; |
| |
| 摘 要： | 港口桥吊用钢丝绳在使用中发生多处断丝现象,通过化学成分分析、力学性能测试、断口分析、金相检验和显微硬度测试等方法对断丝原因进行了分析。结果表明:钢丝绳断丝的性质为疲劳断裂,断裂源位于钢丝表面的损伤或磨损处;断丝表面存在的较多磨损、挤压剥落等缺陷以及断丝显微组织中存在一定数量的铁素体共同导致了钢丝绳中钢丝的早期疲劳断裂。
|
| 关 键 词： | 钢丝绳 断丝 疲劳 平行裂纹 |
Fracture Wires Causes Analysis of Steel Wire Rope for Port Machine |
| |
| BA Fa-hai,LI Ling,LU Zhou.Fracture Wires Causes Analysis of Steel Wire Rope for Port Machine[J].Materials For Mechanical Engineering,2009(12). |
| |
| Authors: | BA Fa-hai LI Ling LU Zhou |
| |
| Affiliation: | BA Fa-hai,LI Ling,LU Zhou (Shanghai Research Institute of Materials,Shanghai 200437,China) |
| |
| Abstract: | The fractured wires were found in servicing steel wire rope,which used in port machine.The fracture wires reason was analyzed by chemical composition analysis,mechanical properties test,fracture observation,metallographic examination and microhardness test,etc.The results show that fracture characteristic was fatigue.The fracture origin was in the zone of surface abrasion and squeeze-peeling.The reason caused early fracture wires involved the defects of surface abrasion,squeeze-peeling and a little ferrite ... |
| |
| Keywords: | steel wire rope fracture wire fatigue parallel crack |
| 本文献已被 CNKI 等数据库收录！ |
|
