首页 | 本学科首页   官方微博 | 高级检索  
     

镁合金表面冷喷涂快凝Zn-Al合金粉末的研究
引用本文:刘彦学,袁晓光,黄宏军,王怡松,吕楠,赵惠,熊天英.镁合金表面冷喷涂快凝Zn-Al合金粉末的研究[J].特种铸造及有色合金,2006,26(4):204-207.
作者姓名:刘彦学  袁晓光  黄宏军  王怡松  吕楠  赵惠  熊天英
作者单位:1. 沈阳工业大学
2. 辽宁工程技术大学
3. 中国科学院沈阳金属研究所
基金项目:辽宁省沈阳市科技攻关项目
摘    要:对镁合金表面冷喷涂快凝Zn-Al合金粉末工艺进行了研究,观察了涂层微观组织,并分析了涂层与基体之间的结合,测定了涂层的硬度和涂层与基体的结合强度。结果表明,采用冷喷涂技术制备的快凝Zn—Al合金粉末涂层组织致密,基体与涂层的结合处只产生塑性变形并且无熔化现象,涂层硬度比基体硬度显著提高。

关 键 词:冷喷涂  镁合金  快凝Zn-Al合金粉末
文章编号:1001-2249(2006)04-0204-04
收稿时间:2006-01-18
修稿时间:2006年1月18日

Rapidly Solidified Zn-Al Powder on Surface of Mg Alloy by Cold Spray Method
Liu Yanxue,Yuan Xiaoguang,Huang Hongjun,Wang Yisong,Lü Nan,Zhao Hui,Xiong Tianying.Rapidly Solidified Zn-Al Powder on Surface of Mg Alloy by Cold Spray Method[J].Special Casting & Nonferrous Alloys,2006,26(4):204-207.
Authors:Liu Yanxue  Yuan Xiaoguang  Huang Hongjun  Wang Yisong  Lü Nan  Zhao Hui  Xiong Tianying
Abstract:The microstructure,hardness of rapidly solidified Zn-Al powder coating on surface of magnesium alloy by cold spray method as well as the bonding strength between the coating and the matrix were investigated,and only the bonding between the coating and the matrix were understood.The result shows that the coating with sound microstructure can be obtained,and only the mechanical bonding between the coating and the matrix can be observed.The hardness of the coating is greatly higher than that of the matrix alloy.
Keywords:Cold Spray  Magnesium Alloy  Rapidly Solidified Zn-Al Alloy Powder  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号