首页 | 本学科首页   官方微博 | 高级检索  
     

不定型TiO2薄膜修饰电极的制备及其电极过程动力学特性
引用本文:毕孝国,;修稚萌,;牛微,;孙伟,;孙旭东.不定型TiO2薄膜修饰电极的制备及其电极过程动力学特性[J].沈阳黄金学院学报,2009(2):114-118.
作者姓名:毕孝国  ;修稚萌  ;牛微  ;孙伟  ;孙旭东
作者单位:[1]东北大学材料与冶金学院,沈阳110004; [2]沈阳工程学院动力工程系,沈阳110136; [3]东北大学分析测试中心,沈阳110004
基金项目:辽宁省教育厅科技项目(20060587)和辽宁省自然基金项目(20031053)
摘    要:通过熔胶-凝胶法在ITO导电玻璃基片表面制备一层TiO2薄膜,将其在空气中分别进行150℃×2 h,200℃×2 h和250℃×2 h的热处理,形成不定型TiO2薄膜修饰电极.用X射线衍射仪和扫描电镜对薄膜结构和形貌进行了表征.将该修饰电极作为工作电极,与作为参比电极的饱和甘汞电极、作为辅助电极的铂黑电极、作为电解质溶液的碳酸丙烯酯+高氯酸锂一起构成三电极测试体系.根据该电极的循环伏安曲线测试结果讨论了该电极过程的动力学特征,分析了扫描参数和薄膜的热处理温度对电极过程动力学的影响.

关 键 词:TiO2薄膜  电致变色  修饰电极  电极过程

Preparation of amorphous TiO2 film modified electrodes and kinetic characteristic of its electrode processs
Affiliation:BI Xiao-guo, XIU Zhi-meng , NIU Wei , SUN Wei , SUN Xu-dong (1. School of Materials & Metallurgy, Northeastern University, Shenyang 110004, China; 2. Thermal energy department, Shenyang Institute of Engineering, Shenyang 110136, China; 3. Analysis & test centre, Northeastern University, Shenyang 110004, China)
Abstract:Amorphous TiO2 film modified electrodes were fabricated by depositing TiO2 films on ITO conductive glass using sol - gel technique and heat treatment with 150 RE × 2 h, 200 RE ×2 h and 250 RE × 2 h in air. The structure and morphologies of obtained electrodes were characterized by X - ray diffractor and SEM. The modified electrodes, SCE ( as reference electrode) , black platinum electrode ( as auxiliary one) and LiClO4 + PC solution ( as electrolyte ) formed a three - electrode cell. According to the results of cyclic voltammogram ( CV), kinetic characteristics of the electrode process and the effects of scanning parameters and heat treatment temperatures of the film on them were analyzed.
Keywords:TiO2 film  electrochromism  modified electrode  electrode process
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号