|
|||||
|
|
| 数控机床径向运动误差的形成机理及补偿方法研究 | |
| 引用本文： | 杨世锡,胡小平,吴昭同.数控机床径向运动误差的形成机理及补偿方法研究[J].中国机械工程,2001,12(2):179-183. |
| 作者姓名： | 杨世锡 胡小平 吴昭同 |
| 作者单位： | 1. 浙江大学机械工程及自动化系 杭州市 310027 2. 杭州电子工业学院机电工程分院 杭州市 310037 3. 浙江大学机械工程及自动化系 |
| 基金项目： | 国家自然科学基金资助项目（59075186）；机械部攻关项目（97-776-03-03/01） |
| 摘 要： | 研究数控机床圆周插补运动径向误差的形成机理，并提出一种误差软件补偿方法。分别用圆轨迹运动误差测试仪和圆度仪测出数控机床圆周插补运动的径向误差，对该误差建立计算机误差补偿模型，应用该模型进行软件补偿实验研究。实验结果验证了误差形成机理的分析，同时表明提出的误差软件补偿方法能有效地提高数控机床的圆轨迹精度。 |
| 关 键 词： | 数控机床 运动误差 补偿技术 伺服系统 |
| 文章编号： | 1004-132Ⅹ(2001)02-0179-05 |
Study on Mechanism and Software Compensation for Radial Motion Errors of NC Machine Tools |
|
| YANG,Shixi.Study on Mechanism and Software Compensation for Radial Motion Errors of NC Machine Tools[J].China Mechanical Engineering,2001,12(2):179-183. | |
| Authors: | YANG Shixi |
| Abstract: | This paper firstly studied the mechanism of radial errors of NCmachine tools during circular interpolation motion， then put forward a software compensation method to decrease the dimensional errors and shape errors during circular interpolation motion. These errors discussed were measured by detecting the relative distance between the spindle nose and the work piece on the table using an elastically connected bar. Finally, a model was set up to deal with these errors and compensated for these errors with changing the interpolation vectors. These studies deduced that circular motion errors of NC machine tools are mainly relative to servo gains of two axis (K)、radius of work piece (R) and motion velocity(ω).Experiments also show that the compensation method can decrease the circular motion errors of NC machine tools. |
| Keywords: | NC machine tool motion error compensation technology servo system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |