| 中厚、薄板快速电弧焊热循环数学模型 |
| |
| 引用本文： | 胡波,;胡礼木. 中厚、薄板快速电弧焊热循环数学模型[J]. 陕西工学院学报, 2008, 0(1): 5-8 |
| |
| 作者姓名： | 胡波, 胡礼木 |
| |
| 作者单位： | [1]陕西理工学院电气工程及自动化系,陕西汉中723003; [2]陕西理工学院材料科学与工程系,陕西汉中723003 |
| |
| 摘 要： | 从电弧焊热源（电弧）在中厚、薄板对接焊时以一定速度匀速移动的实际情况出发，建立了比较适用的焊接热影响区的热循环方程，并根据焊接热影响区中某点的t8/5（或8/3）在焊接条件不变的前提下和该点与热源的距离基本无关这一事实，推导出不合被焊材料的定压比热容、热导率、密度、热扩散率等物理性能以及焊接热输入、焊接速度和板厚等参数，只含有热循环峰值温度Tmax、焊件初始温度T0及t8/5（或t8/3）等参量的热循环数学模型，从而简化了计算，方便了应用。
|
| 关 键 词： | 电弧焊 焊接热循环 数学模型 |
Numerical model of thermal cycle in arc welding of steel plate and sheet |
| |
| Affiliation: | HU Bo, HU Li-mu( 1. Dept. of electricity and controlling engineering, Shaanxi University of Technology, Hanzong 723003, China ; 2. Dept. of materials science and technology, Shaanxi University of Technology, Hanzong 723003, China) |
| |
| Abstract: | Based on the practice of heat source （arc） movement with a uniform speed in medium thick and thin steel plates, an equation of heat affected zone thermal cycle was set up. Further more, according to the fact that the cooling time t8/5 （ t8/3 ） at one point of heat affected zone in cooling is grossly independent of the distance to the center of the source, a numerical model of thermal cycle was derived in which the heat capacity, heat conductivity, density and the heat diffusivity of welded material, heat input, welding speed and plate thickness disappear, but only the peak temperature Tmax,preheat or interpass temperature T0 and the cooling time t8/5 （ or t8/3 ） are contained. Therefore, it is valuable in welding study and welding production due to its simplified calculation and the convenient application. |
| |
| Keywords: | arc welding thermal cycle numerical model |
| 本文献已被 维普 等数据库收录！ |
|
