| 控制轧制与辊型选择 |
| |
| 引用本文： | 唐国军,徐维峰. 控制轧制与辊型选择[J]. 宽厚板, 2005, 11(1): 26-30 |
| |
| 作者姓名： | 唐国军 徐维峰 |
| |
| 作者单位： | 舞阳钢铁有限责任公司;舞阳钢铁有限责任公司 |
| |
| 摘 要： | 通过改变辊系辊型(支承辊锥度)，控制板型、减少轧制道次、提高轧制节凑，进一步提高控制轧制过程中的道次变形程度，从而提高原料收得率、减少计划外、提高产品的综合性能．
|
| 关 键 词： | 控制轧制 辊型 |
| 修稿时间： | 2004-10-20 |
Controlled Rolling and Roll Profile Selection |
| |
| Tang Guojun and Xu Weifeng. Controlled Rolling and Roll Profile Selection[J]. Wide and Heavy Plate, 2005, 11(1): 26-30 |
| |
| Authors: | Tang Guojun and Xu Weifeng |
| |
| Affiliation: | Wuyang Iron and Steel Co.Ltd |
| |
| Abstract: | Material yield is enhanced,unscheduled products are reduced and overall properties are improved through change of roll profile(taper of back-up rolls)in roll cassette,shape control,reduction of rolling passes,quickening of rolling rhythms,further increase in degree of deformation per pass during rolling process. |
| |
| Keywords: | Controlled rolling Roll profile |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
