|
|||||
|
|
| 16MnR中板热轧变形时再结晶规律的研究 | |
| 引用本文： | 魏英立,卢育红,张国滨,田亚强,任学平,刘文广,梁均. 16MnR中板热轧变形时再结晶规律的研究[J]. 塑性工程学报, 2007, 14(2): 30-34 |
| 作者姓名： | 魏英立 卢育红 张国滨 田亚强 任学平 刘文广 梁均 |
| 作者单位： | 1. 河北理工大学,教务处,冶金与能源学院,唐山,063009 2. 北京科技大学,材料科学与工程学院,北京,100083 3. 河北唐山钢铁公司冷轧厂,唐山,063009 4. 河北承德钢铁公司连轧厂,承德,067002 |
| 摘 要： | 借助于理论分析与实验模型研究,模拟了16MnR中板热轧变形时奥氏体再结晶规律的演化过程,并根据实测结果对静态再结晶模型进行了修正。所得结果与实测符合得较好,作为将理论与实验的研究结果应用于现场的初步尝试,为在生产实际中控制与预报中板的组织与性能提供了理论基础。 |
| 关 键 词： | 16MnR 中板热轧 再结晶模型 |
| 文章编号： | 1007-2012（2007）02-0030-05 |
| 收稿时间： | 2006-03-07 |
| 修稿时间： | 2006-12-11 |
Research of the recrystallization rule on 16MnR plate during hot rolling |
|
| WEI Ying-li,LU Yu-hong,ZHANG Guo-bin,TIAN Ya-qiang,REN Xue-ping,LIU Wen-guang,LIANG Jun. Research of the recrystallization rule on 16MnR plate during hot rolling[J]. Journal of Plasticity Engineering, 2007, 14(2): 30-34 | |
| Authors: | WEI Ying-li LU Yu-hong ZHANG Guo-bin TIAN Ya-qiang REN Xue-ping LIU Wen-guang LIANG Jun |
| Abstract: | The thesis simulated evolutionary process of the recrystallization rule of 16MnR plate during hot rolling and amend static recrystallization model by actual results in the presence of theory analysis and experiment model research. The simulative results, which were coincident with the experimental results, could be used as the parameters in the on-site production. This paper presented theoretical basis for controlling and forecasting microstructure and property of medium plate in the industrial production. |
| Keywords: | 16MnR |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |