| 泡沫塑料连续挤出成型中的进气系统 |
| |
| 引用本文： | 陈再良 彭玉成. 泡沫塑料连续挤出成型中的进气系统[J]. 中国塑料, 1999, 13(11): 67-70 |
| |
| 作者姓名： | 陈再良 彭玉成 |
| |
| 作者单位： | 华南理工大学!广州,510641,华南理工大学!广州,510641,华南理工大学!广州,510641 |
| |
| 摘 要： | 通过实验研究,详细分析了进气流量进气压力、进气益、喷嘴结构对气泡形态的影响,指出了在泡沫塑料连续挤出成型过程中的最佳进气效果和合理的进气条件。
|
| 关 键 词： | 熔体 气泡形态 进气条件 泡沫塑料 挤出成型 |
Gas Feeding System in Foamed Plastics Continuous Extrusion |
| |
| Chen Zailiang,Pen Yuchen and Li Kailin. Gas Feeding System in Foamed Plastics Continuous Extrusion[J]. China Plastics, 1999, 13(11): 67-70 |
| |
| Authors: | Chen Zailiang Pen Yuchen Li Kailin |
| |
| Abstract: | The influences of flow rate, pressure, position and nozzle construction for gas entering into the polymer melts on shape of cell are analyzed in detail.The optimum efficiency of gas feeding and reasonable gas feeding conditions are indicated in foamed plastics continuous extrusion.; |
| |
| Keywords: | Polymer Melts Shape of cell Gas feeding condition |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
