首页 | 本学科首页   官方微博 | 高级检索  
     

SiC颗粒增强6061Al基复合材料的动态拉伸性能Ⅰ应变硬化
引用本文:钱立和,王中光,小林俊郎,户田裕之.SiC颗粒增强6061Al基复合材料的动态拉伸性能Ⅰ应变硬化[J].材料研究学报,2002,16(3):285-288.
作者姓名:钱立和  王中光  小林俊郎  户田裕之
作者单位:1. 中国科学院金属研究所沈阳材料科学国家,联合,实验室
2. 日本丰桥技术科学大学
基金项目:国家研究发展基金,G19906050,
摘    要:利用拉伸split Hopkinson bar实验装置研究了SiCp/6061Al复合材料及其基体合金的动态拉伸性能及应变硬化行为。结果表明,与静态加载类似,在动态加载条件下,SiCp/6061Al复合材料的强度高于基体合金的强度,其断裂延伸率低于基体合金的断裂延伸率,在低应变动态拉伸时,复合材料的应变硬化指数高于Al合金材料的应变硬化指数,随着应变的增加,复合材料的应变硬化指数迅速下降,以至低于基体合金的应变硬化指数。

关 键 词:SiC  颗粒增强  6061Al基复合材料  动态拉伸性能  应变速率  应变硬化  碳化硅  
文章编号:1005-3093(2002)03-0285-04
修稿时间:2001年5月25日

DYNAMIC TENSILE DEFORMATION OF SiCp/6061Al COMPOSITE PART 1 STRAIN HARDENING CHARACTERISTIC
QIAN Lihe WANG Zhongguang Kobayashi Toshiro Toda Hiroyuki.DYNAMIC TENSILE DEFORMATION OF SiCp/6061Al COMPOSITE PART 1 STRAIN HARDENING CHARACTERISTIC[J].Chinese Journal of Materials Research,2002,16(3):285-288.
Authors:QIAN Lihe WANG Zhongguang Kobayashi Toshiro Toda Hiroyuki
Affiliation:QIAN Lihe1 WANG Zhongguang1** Kobayashi Toshiro2 Toda Hiroyuki2
Abstract:An investigation was made on the dynamic tensile deformation and strain hardening characteristic of a SiCp/6061AI composite and its matrix alloy using tensile split Hopkinson pressure bar apparatus. It is shown that under dynamic loading condition, as in the case of static loading, the strength of the SiCp/6061AI is higher and its elongation to fracture is lower than those of 6061AI alloy. At a low strain, the dynamic tensile strain hardening exponent of the studied composite is higher than that of its matrix alloy. However, the strain hardening exponent of the composite decreases rapidly with increasing strain, and becomes lower than that of its matrix alloy at a higher strain. The deformation and damage mechanisms are discussed in terms of dislocation.
Keywords:composite  dynamic tension  strain rate  strain hardening  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号