A micro-model for elasto-plastic adhesive–contact in micro-switches: Application to cyclic loading |
| |
| Affiliation: | 1. CEIT and TECNUN (University of Navarra), P. Manuel Lardizabal 15, 20018 San Sebastián, Spain;2. Design Technology Solutions, Intel Corporation, Hillsboro 97124, OR, USA;1. Department of Engineering and Architecture, University of Parma, Viale Usberti 181/A, 43124 Parma, Italy;2. Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI 48109-2125, USA;3. Department of Mechanical Engineering, Linköping University, S-581 83 Linköping, Sweden |
| |
| Abstract: | Stiction is a major failure mode in micro-electromechanical systems. In previous works, a statistical rough surfaces interaction model, for which only elastic adhesive–contact has been considered, was developed for multiscale analyzes.However, during the impact between rough surfaces, plastic deformations of asperities cannot always be neglected. In the present work, the adhesion between rough surfaces is studied considering the elasto-plastic deformations of the asperities, and a model predicting the resulting micro-adhesive–contact forces is derived.For illustration purpose, an electrostatic-structural analysis is performed on a micro-switch. To determine the degree of plasticity involved, the impact energy of the movable electrode at pull-in is estimated. Thus the maximal adhesive force evolution during cyclic loading is predicted using the developed model. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
