首页 | 本学科首页   官方微博 | 高级检索  
     

磷酸酯类阻燃剂在PC/ABS合金中的应用
引用本文:张婷婷,郑实.磷酸酯类阻燃剂在PC/ABS合金中的应用[J].广东化工,2009,36(7):8-10,64,65.
作者姓名:张婷婷  郑实
作者单位:华东理工大学,化工学院,上海,200237
摘    要:文章研究了磷酸酯类阻燃剂RDP、BDP以及它们与TPP的协同作用对PC/ABS合金的阻燃性能、热失重行为以及力学性能的影响。结果表明,PC/ABS合金的LOI随着阻燃和的增加而增加,当阻燃剂RDP和BDP添加量均为15%时,LOI达到最大值,分别为363%和35.3%,且均达FV-0级。通过热重分析表明,阻燃PC/ABS比纯PC/ABS合金的分解速率小得多。研究还表明,阻燃剂的协同作用使PC/ABS合金的阻燃性能优于添加单一阻燃剂的PC/ABS合金的阻燃性能。

关 键 词:磷酸酯类阻燃剂  PC/ABS  阻燃性能  力学性能

The Application of Phosphate Flame Retardants in PC/ABS
Zhang Tingting,Zheng Shi.The Application of Phosphate Flame Retardants in PC/ABS[J].Guangdong Chemical Industry,2009,36(7):8-10,64,65.
Authors:Zhang Tingting  Zheng Shi
Affiliation:Zhang Tingting,Zheng Shi (School of Chemical Engineering,East China University of Science and Technology,Shanghai 200237,China)
Abstract:In the paper, the flame-retardant properties, thermogravimetric analysis (TGA) and mechanical properties of PC/ABS with RDP, BDP and TPP as flame retardants were studied. The results showed that the limiting oxygen index (LOI) of PC/ABS was increased as the content of flame retardant increased, when the content of RDP or BDP was 15 wt%, the LOI were reached the maximum, 36.3 % and 35.5 % separately, and both reached FV-0 class. TGA analysis showed that the residue of flame-retarding PC/ABS was higher than n...
Keywords:PC/ABS  phosphate flame-retardant  PC/ABS  flame retardant propertias  mechanical properties
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号