| 尼龙—12增韧改性聚甲醛的研究 |
| |
| 引用本文： | 徐卫兵,朱士旺.尼龙—12增韧改性聚甲醛的研究[J].工程塑料应用,1995,23(1):9-11. |
| |
| 作者姓名： | 徐卫兵 朱士旺 |
| |
| 作者单位： | 合肥工业大学化学系
(徐卫兵，朱士旺)，合肥工业大学化学系(蔡琼英) |
| |
| 摘 要： | 采用尼龙１２，用机械共混的方法对聚甲醛进行增韧改性，并对共混物的形态，结构与力学性能进行测试与分析。研究发现，在ＰＯＭ／ＰＡ１２共混体系中，存在差氢键的相互作用。ＰＡ１２的加入，使得ＰＯＭ的熔体温度Ｔｍ下降，且共混体系的结晶度Ｘｃ和拉伸强度下降，ＰＡ１２的含量为５％时，共混物的缺口冲击强度达到最大值。
|
| 关 键 词： | 聚甲醛 尼龙12 共混物 增韧 改性 塑料 |
A STUDY OF THE TOUGHENED POM BY POLY AMIDE 12 |
| |
| Xu Weibing Zhu Shiwang Cai Qiongying.A STUDY OF THE TOUGHENED POM BY POLY AMIDE 12[J].Engineering Plastics Application,1995,23(1):9-11. |
| |
| Authors: | Xu Weibing Zhu Shiwang Cai Qiongying |
| |
| Abstract: | In this paper toughening of POM by Polyamide 12 was studied by means of mechanical blending, and the morphology .structure and mechanicial properties of the blend were measured and analyzed. The results proclaimed that there existed Hydrogen bonds ;n POM/PA12 blend. The adding of PA12 casued . the decrease of ,crystallinity,and the tensile strength. If the content of PA1.2 was 5 precent.the notched impact strength of the blend approached its maximum. |
| |
| Keywords: | POM polyamide 12 Blend Toughen |
| 本文献已被 CNKI 维普 等数据库收录！ |
