首页 | 本学科首页   官方微博 | 高级检索  
     

单轴对称十字型钢混凝土中长柱偏压性能试验研究
引用本文:周天华,余吉鹏,张钰,李亚鹏. 单轴对称十字型钢混凝土中长柱偏压性能试验研究[J]. 工程力学, 2021, 38(4): 111-122. DOI: 10.6052/j.issn.1000-4750.2020.05.0333
作者姓名:周天华  余吉鹏  张钰  李亚鹏
作者单位:长安大学建筑工程学院,西安 710061
基金项目:陕西省重点研发计划项目(2019SF-239)。
摘    要:为研究单轴对称十字型钢混凝土中长柱偏心受压性能,进行8根单轴对称十字型钢混凝土中长柱偏压试验,分别研究不同加载方向十字型钢偏心率和荷载偏心率对试件破坏模式、侧向挠度、荷载-挠度曲线和极限承载力的影响规律,建立该组合柱正截面受压承载力计算方法.结果表明:根据荷载偏心率的不同,组合柱表现出小偏心受压破坏和大偏心受压破坏两种...

关 键 词:组合柱  单轴对称十字型钢  偏心受压  试验研究  承载力
收稿时间:2020-05-30

EXPERIMENTAL INVESTIGATION ON SLENDER STEEL REINFORCED CONCRETE COLUMNS WITH MONOSYMMETRIC CROSS-SHAPED STEEL UNDER ECCENTRIC LOADING
ZHOU Tian-hua,YU Ji-peng,ZHANG Yu,LI Ya-peng. EXPERIMENTAL INVESTIGATION ON SLENDER STEEL REINFORCED CONCRETE COLUMNS WITH MONOSYMMETRIC CROSS-SHAPED STEEL UNDER ECCENTRIC LOADING[J]. Engineering Mechanics, 2021, 38(4): 111-122. DOI: 10.6052/j.issn.1000-4750.2020.05.0333
Authors:ZHOU Tian-hua  YU Ji-peng  ZHANG Yu  LI Ya-peng
Affiliation:School of Civil Engineering, Chang’an University, Xi’an 710061, China
Abstract:To study the eccentric compression performance of slender steel reinforced concrete columns with monosymmetric cross-shaped steel, eight specimens were subjected to eccentric loading. The effects of the crossshaped steel eccentricity ratio and the load eccentricity ratio on the failure pattern, lateral deflection, load-lateral deflection curves and ultimate strength were studied in different eccentric directions. A computational method for the normal section strengths of slender steel reinforced concrete columns with monosymmetric cross-shaped steel is proposed. The specimens exhibited small-eccentricity compression failure and large-eccentricity compression failure according to the different load eccentricity ratios. The cross-section strain conformed to the plane section assumption. The ultimate strength and deformability of the specimens decreased with the increase of cross-shaped steel eccentricity ratio in the positive eccentric direction. In the negative eccentric direction, the cross-shaped steel eccentricity ratio had negligible effect on the eccentric compression performance of the specimens failed in smalleccentricity compression. With the increase in the cross-shaped steel eccentricity ratio, the ultimate strength of the specimens failed in large-eccentricity compression increased slightly. The initial stiffness and the ultimatestrength of the specimens decreased with the increase of the load eccentricity ratio. The monosymmetric crossshaped steel is equivalent to the H-shaped steel in a safe way, and the eccentric strengths of the transformed section specimens calculated by JGJ 138-2016 are conservative. The eccentric strengths of the specimens calculated by the proposed method agree well with the test results.
Keywords:composite column  monosymmetric cross-shaped steel  eccentric compression  experimental study  strength
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《工程力学》浏览原始摘要信息
点击此处可从《工程力学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号