Investigating effects of resistance wire heating on AISI 1023 weldment characteristics during ASAW |
| |
Authors: | Ankush Choudhary Manoj Kumar Deepak Rajendra Unune |
| |
Affiliation: | Department of Mechanical-Mechatronics Engineering, The LNM Institute of Information Technology Jaipur, Jaipur, India |
| |
Abstract: | In this article, effects of advanced submerged arc welding process parameters on weld bead geometry have been investigated. A novel water-cooled torch has been developed which allow a use of higher preheat current values for a continuous advanced submerged arc welding (ASAW) operation. Weld beads have been deposited on AISI 1023 steel plates by varying open circuit voltage, wire feed rate, welding speed, nozzle to plate distance, and preheat current as per central composite design. The relationships between welding parameters and weldment characteristics namely bead width, penetration, reinforcement, and dilution have been developed using multiple linear regression. The effects of individual process parameters and their interactions on response parameters were examined. Finally, single and multiobjective optimization of process parameters were performed using desirability approach and Jaya algorithm. The results reveal that a smaller bead width and lower dilution can be achieved with the developed torch by allowing the use of higher preheat current values. |
| |
Keywords: | ARC BEAD geometry optimization submerged welding |
|
|