| 涡管分离器流场的数值模拟及试验研究 |
| |
| 引用本文： | 彭维明,应纯同,曾实.涡管分离器流场的数值模拟及试验研究[J].机械工程学报,2002,38(2):141-144. |
| |
| 作者姓名： | 彭维明 应纯同 曾实 |
| |
| 作者单位： | 清华大学工程物理系,北京,100084 |
| |
| 基金项目： | SHELL公司资助项目 |
| |
| 摘 要： | 分析了湍流中的计算流体动力学ＣＦＤ模型。用介于ＡＳＭ和ＲＳＭ之间的一个混和模型，对涡管分离器中的流场进行了理论计算，得出了涡管分离器中的流场分布规律。然后用激光多普勒装置试验测试了分离器中的速度分布，揭示了在涡管分离器底部有强烈的方向向内的径向流动。这对涡管分离器的优化设计有着重要意义。
|
| 关 键 词： | 涡管旋风分离器 CFD 激光多普勒 |
| 修稿时间： | 2000年8月7日 |
NUMERICAL SIMULATION AND EXPERIMENTAL RESEARCH ON THE FLOWPATTERN IN SWIRLING TUBE SEPARATIONS |
| |
| Peng Weiming,Ying Chuntong,Zeng Shi.NUMERICAL SIMULATION AND EXPERIMENTAL RESEARCH ON THE FLOWPATTERN IN SWIRLING TUBE SEPARATIONS[J].Chinese Journal of Mechanical Engineering,2002,38(2):141-144. |
| |
| Authors: | Peng Weiming Ying Chuntong Zeng Shi |
| |
| Affiliation: | Tsinghua University |
| |
| Abstract: | The computational fluid dynamics (CFD) turbulence models in the cyclones is presented. The flowpattern in the swirl tube separators is simulated by using the turbulence model, which is a hybrid between an algebraic stress model (ASM) and a full Reynolds stress model (RSM). The simulated results for distribution of the velocity components in the swirl tube separators are got. The LDA is applied for the measurement of the velocity components in the centrifugal separators. Both of the strong inward radial flow under the vortex finder wall and the strong inward flow at the bottom of the swirl tube, are existed. |
| |
| Keywords: | Swirl tube separator CFD LDA |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
