| WHF法在轴类件生产中的应用 |
| |
| 引用本文： | 魏泽辉. WHF法在轴类件生产中的应用[J]. 特钢技术, 2005, 10(3): 44-45 |
| |
| 作者姓名： | 魏泽辉 |
| |
| 作者单位： | 魏泽辉（攀钢集团四川长城特殊钢股份有限公司） |
| |
| 摘 要： | WHF法主要强调锻件的中心压实效应，对于解决因冶炼带来的锭型偏析、中心疏松、缩孔等缺陷有较好的效果，而且针对性强、方便适用，因此被广泛应用于大、中型轴类件的生产。
|
| 关 键 词： | WHF法 砧宽比 轴类件 |
| 收稿时间： | 2005-03-11 |
| 修稿时间： | 2005-03-11 |
The Application of WHF Method on Manufacturing Of the Shaft Parts |
| |
| Wei Zehui Co. Ltd, Pangang Group). The Application of WHF Method on Manufacturing Of the Shaft Parts[J]. Special Steel Technology, 2005, 10(3): 44-45 |
| |
| Authors: | Wei Zehui Co. Ltd Pangang Group) |
| |
| Affiliation: | Sichuan Changcheng Special Steel (Group |
| |
| Abstract: | The WHF method, maily, emphasizes, decentral, real, press, effect, ofdeforgings, it has better results in solving of the metallurgical defects such as ingot segregation, central porosity, hole shrinkage. So it has very suitable pertinence and it is easy for the application in the manufacturing of the large and medium size shaft parts. |
| |
| Keywords: | WHF method Anvil width ratio Shaft parts. |
| 本文献已被 维普 等数据库收录！ |
|
