| 集成激光制造系统的开放式控制研究 |
| |
| 引用本文： | 颜永振,虞钢,王立新,宁伟建.集成激光制造系统的开放式控制研究[J].计算机集成制造系统,2007,13(10):1997-2000,2008. |
| |
| 作者姓名： | 颜永振 虞钢 王立新 宁伟建 |
| |
| 作者单位： | 中国科学院,力学研究所,北京,100080 |
| |
| 摘 要： | 针对激光制造系统的发展要求,提出了一种开放式集成激光制造系统,该系统将激光器控制模块、测量模块、机器人模块和计算机控制模块等进行集成,采用模块化设计方法,各模块功能独立,实现了主控计算机对各控制模块的协调控制.其中激光器由PROFIBUS-DP现场总线控制,机器人由运动控制器控制.解决了传统激光制造系统结构封闭,专用性强,难于实现柔性化制造的难题.通过实际应用,进一步证明了该系统的开放性和可控性.
|
| 关 键 词： | 开放式控制 现场总线 集成激光制造系统 运动控制器 集成 激光制造 制造系统 控制研究 manufacturing system laser integrated control 可控性 开放性 应用 柔性化 专用性 封闭 系统结构 运动控制器 现场总线控制 协调控制 主控计算机 模块功能 |
| 文章编号： | 1006-5911（2007）10-1997-04 |
| 收稿时间： | 2006-11-14 |
| 修稿时间： | 2006-11-142007-03-05 |
Open control of integrated laser manufacturing system |
| |
| YAN Yong-zhen,YU Gang,WANG Li-xin,NING Wei-jian.Open control of integrated laser manufacturing system[J].Computer Integrated Manufacturing Systems,2007,13(10):1997-2000,2008. |
| |
| Authors: | YAN Yong-zhen YU Gang WANG Li-xin NING Wei-jian |
| |
| Affiliation: | Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China |
| |
| Abstract: | To meet the requirements of laser manufacturing system,an open integrated laser manufacturing system based on PROess FIeldBUS Distributive Peripheral(PROFIBUS-DP) and open motion controller was presented.This system integrated modules of laser,robot,measurement,controlling computer,etc.By using the modularized designing concept,each module was functionally independent,whereas coordinated control for each control module by main control computer was realized.Laser was controlled by PROFIBUS-DP field bus,and robot was controlled by motion controller.This architecture overcame difficult problems in traditional laser manufacturing system such as close structure,special usage and stiffness.The new system was proved to be open and have better controllability by practical application. |
| |
| Keywords: | open control fieldbus integrated laser manufacturing system motion controller |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
