| 高速锯切用超薄金刚石圆锯片的优化设计 |
| |
| 引用本文： | 张淑贵,李远,黄辉,徐西鹏. 高速锯切用超薄金刚石圆锯片的优化设计[J]. 工具技术, 2009, 43(2): 44-47 |
| |
| 作者姓名： | 张淑贵 李远 黄辉 徐西鹏 |
| |
| 作者单位： | 华侨大学 |
| |
| 摘 要： | 为了降低加工成本、提高石材利用率，在结构静力分析、模态分析和屈曲分析的基础上，采用有限元分析软件ANSYS优化设计出一种适用于高速锯切的超薄金刚石圆锯片结构：锯片厚度为2．4mm，锯齿结块数为60，锯齿长度为18mm，U型水槽与竖直方向夹角为0°、U型水槽深度为7．8mm，径向槽数目为3，径向槽与水平方向夹角为0°，径向槽长度为60mm，径向槽宽度为26．7mm。
|
| 关 键 词： | 金刚石圆锯片 有限元分析 优化设计 高速锯切 |
Optimum Design of Ultra-thin Diamond Saw-blade for High-speed Circular Sawing |
| |
| Zhang ShuguiLi Yuan Huang Hui et al. Optimum Design of Ultra-thin Diamond Saw-blade for High-speed Circular Sawing[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2009, 43(2): 44-47 |
| |
| Authors: | Zhang ShuguiLi Yuan Huang Hui et al |
| |
| Abstract: | In order to reduce the machining cost of diamond saw blade and enhance the usage of stone,based on the structural static analysis,modal analysis and buckling analysis,a kind of structure of ultra-thin diamond saw blade adapting to high-speed circular sawing was optimized by using ANSYS,a kind of finite element analyzing software.The saw blade is thickness of 2.4 mm,diamond impregnated segment number 60,diamond impregnated segment length of 18mm,U-gullet and vertical direction as the angle between 0°,U-gullet a depth of 7.8 mm,the number of radial slots 3,radial slot and the angle between the horizontal direction for the 0°,radial slots length of 60 mm,and radial slots width of 26.7 mm. |
| |
| Keywords: | diamond circular saw-blade finite element analysis optimum design high-speed circular sawing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
