| 新型压裂泵阀材料的耐磨损性能研究 |
| |
| 引用本文： | 杨启明 周锡容 等. 新型压裂泵阀材料的耐磨损性能研究[J]. 西南石油学院学报, 2001, 23(6): 73-76 |
| |
| 作者姓名： | 杨启明 周锡容 等 |
| |
| 作者单位： | 西南石油学院机电工程学院，四川南充637001 |
| |
| 基金项目： | 中国石油物资装备总公司新技术开发项目“压裂泵塞密封副研究”的部分内容. |
| |
| 摘 要： | 通过对多种材料在不同试验条件下耐冲击磨料磨损性能的初步研究，优选出20CrMnTi材料开展了在冲击磨损，滑动磨料磨损和冲击磨料磨损条件下的进一步试验，分析了在各磨损与变形条件下的特点，对所观察到的现象与机理进行了讨论，得出了一些有益结论。研究表明，20CrMnTi材料经渗碳＋淬火＋低温回火处理后，具有较好的抗冲击磨料磨损的能力。这对研究新型压裂泵泵阀抗冲击磨料磨损性能的材料具有一定的指导意义。
|
| 关 键 词： | 压裂泵 泵阀 冲击磨损 滑动磨损 冲击磨料磨损 磨损量 变形量 油气开采 |
| 文章编号： | 1000-2634(2001)06-0073-04 |
| 修稿时间： | 2001-04-17 |
Resisting Wear's Property Research of the Material of New Type Fracturing Pump's Valve |
| |
| YANG Qi ming,. Resisting Wear's Property Research of the Material of New Type Fracturing Pump's Valve[J]. Journal of Southwest Petroleum Institute, 2001, 23(6): 73-76 |
| |
| Authors: | YANG Qi ming |
| |
| Abstract: | Through the researches in some material's properties to resist impact abrasive wear, optimized 20CrMnTi optimized was further tested under the condition of impacting ? wear, sliding abrasive wear and impact abrasive wear, analyzed its characteristics, and discussed the appearance and forming mechanism observed. It was got some useful conclusions. The results have shown the heat ? treatment cycle of carburizing hardening low tempering, the 20CrMnTi would be better ability to resist impact abrasive wear. It has a guiding significance to research the new materials of resisting the wear in valves of the fracturing pump. |
| |
| Keywords: | valves of the fracturing pump impacting ? wear sliding abrasive wear impact abrasive wear amount of wear deformation |
| 本文献已被 CNKI 维普 等数据库收录！ |
