| 3D挤出吹塑型坯吹胀的数值模拟 |
| |
| 引用本文： | 赖家美 柳和生 黄汉雄 包忠诩. 3D挤出吹塑型坯吹胀的数值模拟[J]. 中国塑料, 2004, 18(1): 85-87 |
| |
| 作者姓名： | 赖家美 柳和生 黄汉雄 包忠诩 |
| |
| 作者单位： | [1]南昌大学机电工程学院，江西南昌330029 [2]华南理工大学工业装备与控制工程学院，广东广州510640 |
| |
| 基金项目： | 华南理工大学工业装备与控制工程学院实验资助，南昌大学“十五”材料加工工程重点学科科研研究、科技开发项目资助 |
| |
| 摘 要： | 采用超弹本构模型对挤出吹塑型坯吹胀进行了3D数值模拟，得到了型坯在吹胀过程中的型坯轮廓曲线分布以及吹胀完毕时的型坯壁厚分布，模拟的结果与文献的实验结果相吻合；探讨了材料的性能、初始条件和吹胀压力等工艺条件对吹胀完毕后的壁厚分布影响，这为在实际生产获得最佳的加工工艺参数提供了依据。
|
| 关 键 词： | 挤出吹塑 型坯吹胀 数值模拟 |
3D Numerical Simulation of Parison Inflation in Extrusion Blow Molding |
| |
| LAI Jia-mei ,LIU He-sheng ,HUANG Han-xiong ,BAO Zhong-xu. 3D Numerical Simulation of Parison Inflation in Extrusion Blow Molding[J]. China Plastics, 2004, 18(1): 85-87 |
| |
| Authors: | LAI Jia-mei LIU He-sheng HUANG Han-xiong BAO Zhong-xu |
| |
| Affiliation: | LAI Jia-mei 1,LIU He-sheng 1,HUANG Han-xiong 2,BAO Zhong-xu 1 |
| |
| Abstract: | The parison inflation in extrusion blow molding was 3D numerically simulated using a hyper-elastic constitutive model.The simulated profile and wall thickness distribution of parison during inflation were in good agreement with the experiment results reported in the literatures.Effects of material property,initial conditions and operations such as blowing pressure on wall thickness of parison after inflation are expolored,which provided references for the determination of the optimal process conditions. |
| |
| Keywords: | extrusion blow molding parison inflation numerical simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
