| 磷石膏制备轻质墙体材料试验研究 |
| |
| 引用本文： | 李兵兵,李建锡,陈思功,李云峰.磷石膏制备轻质墙体材料试验研究[J].硅酸盐通报,2012,31(2):362-365,376. |
| |
| 作者姓名： | 李兵兵 李建锡 陈思功 李云峰 |
| |
| 作者单位： | 1. 昆明理工大学材料科学与工程学院,昆明,650093
2. 昆明理工大学废弃物资源化国家工程研究中心,昆明,650093 |
| |
| 基金项目： | 国家高技术研究与发展计划(863)项目 |
| |
| 摘 要： | 采用在低温煅烧过的磷石膏中加入缓凝剂和发泡剂的方法制备轻质墙体材料,研究了缓凝剂、水灰比和发泡剂对磷石膏试块强度和轻质化的影响。力学实验测试表明:缓凝剂掺量0.1%、水灰比0.65、发泡剂掺量0.02%的工艺下,磷石膏试块7 d的抗压强度为4.6 MPa,抗折强度为2.2 MPa,初凝时间为27 min,体积密度为0.82 g/cm3;扫描电镜分析表明:此工艺下的磷石膏试块中孔隙合格且结晶质量良好。
|
| 关 键 词： | 磷石膏 结晶结构 墙体材料 固化机理 |
Experimental Study on Lightweight Mural Material with Phosphogypsum |
| |
| LI Bing-bing
,
LI Jian-xi
,
CHEN Si-gong
,
LI Yun-feng.Experimental Study on Lightweight Mural Material with Phosphogypsum[J].Bulletin of the Chinese Ceramic Society,2012,31(2):362-365,376. |
| |
| Authors: | LI Bing-bing LI Jian-xi CHEN Si-gong LI Yun-feng |
| |
| Affiliation: | 1(1.Faculty of Materials Science and Engineering,Kunming University of Science and Technology,Kunming 650093,China; 2.Waste of Resources of National Engineering Research Center,Kunming University of Science and Technology,Kunming 650093,China) |
| |
| Abstract: | Retarder and foaming agent were mixed into phosphogypsum burnt under low temperature to make lightweight mural material.The influence of citric acid,w/c and foaming agent on the strength and thinner of phosphogypsum was researched.Mechanics experimental test showed that when the handicraft w/c is 0.65,the admixture of retarder is 0.1%,foaming agent is 0.02%,the compressive strength of phosphogypsum of 7 d is 4.6 MPa,the bending strength is 2.2 MPa,initial setting time is 27 min and density is 0.82 g/cm3.The analysis of SEM showed that the phosphogypsum in such process exists qualified pore and favourable crystallization quality. |
| |
| Keywords: | phosphogypsum crystal structure mural material curing mechanism |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
