|
|||||
|
|
| 喷射成形高钒高速钢环坯制备技术研究 | |
| 引用本文： | 徐轶,葛昌纯,魏宽,郭志家. 喷射成形高钒高速钢环坯制备技术研究[J]. 粉末冶金技术, 2012, 30(1): 22-27 |
| 作者姓名： | 徐轶 葛昌纯 魏宽 郭志家 |
| 作者单位： | 1. 西南交通大学材料学院,成都,610031 2. 西南交通大学材料学院,成都610031;北京科技大学材料学院特种陶瓷粉末冶金研究所,北京100083 3. 北京科技大学材料学院特种陶瓷粉末冶金研究所,北京,100083 |
| 基金项目： | 国家高技术研究发展计划资助项目，西南交通大学青年教师百人计划资助项目 |
| 摘 要： | 采用喷射成形技术制备高钒高速钢环坯,阐述了喷射成形制备过程方法及工艺参数,制备得到的沉积坯收得率为83.5%。对比观察沉积坯不同位置组织及碳化物形貌,发现:组织均匀细小,碳化物颗粒细小、形状较为规则、分布均匀,合金元素无宏观偏析;孔隙及缺陷主要位于沉积坯与基体的结合界面附近,产生于喷射沉积未完全稳定的试验初期。对热处理后的沉积坯试样进行硬度测试,喷射成形高钒钢淬火硬度为63HRC,高于粉末冶金高钒钢;经过3次回火,硬度逐渐下降,未出现二次硬化现象。 |
| 关 键 词： | 高钒高速钢 喷射成形 碳化物 孔隙度 偏析 |
Research on preparation technology of high-vanadium HSS by spray forming |
|
| Xu Yi , Ge Changchun , Wei Kuan , Guo Zhijia. Research on preparation technology of high-vanadium HSS by spray forming[J]. Powder Metallurgy Technology, 2012, 30(1): 22-27 | |
| Authors: | Xu Yi Ge Changchun Wei Kuan Guo Zhijia |
| Affiliation: | 1)(School of Materials Science and Engineering,Southwest Jiaotong University,Chengdu 610031,China) 2)(School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China) |
| Abstract: | High-vanadium HSS ring billet was prepared by spray forming with yield of 83.5%.Spray forming preparation method and technological parameter were illustrated.The microstructure and carbide morphology on the different position of billet were observed.The results show that carbide particles have small size,regular shape and uniform distribution,alloy elements have no segregation.There are pores and defects nearby interface of deposited billet and substrate,which emerge in the unstable beginning stage of spray forming.The quenching hardness of spray formed high-vanadium HSS 63HRC,is higher than the powder metallurgy high-vanadium HSS.The hardness is gradually decreased by tempering for 3 times,does not appear secondary hardening. |
| Keywords: | high-vanadium HSS spray forming carbide porosity segregation |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |