| 引擎盖VARTM成型充模流动模拟及优化 |
| |
| 引用本文： | 张彦飞,王芳芳,秦泽云,赵贵哲.引擎盖VARTM成型充模流动模拟及优化[J].工程塑料应用,2012,40(5):46-49. |
| |
| 作者姓名： | 张彦飞 王芳芳 秦泽云 赵贵哲 |
| |
| 作者单位： | 中北大学山西省高分子复合材料工程技术研究中心,中北大学材料科学与工程学院,太原030051 |
| |
| 基金项目： | 山西省科技创新计划项目 |
| |
| 摘 要： | 利用RTM-worx仿真模拟软件对引擎盖模型真空辅助树脂传递模塑(VARTM)成型工艺过程进行充模流动模拟,根据引擎盖模型的充模流动模拟结果,确定最终注射方案,并与引擎盖模型的VARTM成型工艺过程相比较。试验结果表明,VARTM成型过程与充模流动结果吻合较好,RTM-worx仿真模拟软件能够有效地对引擎盖模型进行充模流动模拟及优化。
|
| 关 键 词： | RTM-worx 汽车引擎盖 VARTM工艺 充模流动模拟 |
Flow Simulation and Optimization of the Car Hood by VARTM Process |
| |
| Zhang Yanfei
,
Wang Fangfang
,
Qin Zeyun
,
Zhao Guizhe.Flow Simulation and Optimization of the Car Hood by VARTM Process[J].Engineering Plastics Application,2012,40(5):46-49. |
| |
| Authors: | Zhang Yanfei Wang Fangfang Qin Zeyun Zhao Guizhe |
| |
| Affiliation: | (The Research Center for Engineering Technology of Polymeric Composites of Shanxi Province,College of Material Science and Engineering,North University of China,Taiyuan 030051,China) |
| |
| Abstract: | Flow process of the car hood model with VARTM process was simulated by the software of the RTM-worx.The final injection scheme was decided by the simulation results,and then compared with the actual VARTM filling process.It was found that the simulation by RTM-worx showed a good agreement with the experimental result,the RTM-worx software could effectively simulate and optimize the flow process of the car hood model. |
| |
| Keywords: | RTM-worx car hood VARTM process flow simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
