| 无钟炉顶料面形状检测及平台的形成 |
| |
| 引用本文： | 滕召杰,程树森,杜鹏宇.无钟炉顶料面形状检测及平台的形成[J].钢铁研究学报,2012,24(3):58-62. |
| |
| 作者姓名： | 滕召杰 程树森 杜鹏宇 |
| |
| 作者单位： | 1. 北京科技大学冶金与生态工程学院,北京,100083
2. 中冶京诚工程技术有限公司,北京,100176 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 根据无钟炉顶颗粒运动数学模型，结合炉料在高炉内的堆角，建立了高炉内料面形状数学模型。针对高炉布料过程生产者无法直接观察炉内料面形状和料层厚度等信息，利用激光测试技术，提出新的料面形状测量方法。结合国内某钢厂2580m3高炉的参数，利用激光测试新方法，测试高炉开炉过程中的料面形状。根据料面形状的测试结果，得到高炉不同布料矩阵对应的料面平台。
|
| 关 键 词： | 料面形状 平台 布料矩阵 |
Measurement of Charge Level and Formation of Terrace for Bell-Less Top of Blast Furnace |
| |
| TENG Zhao-jie,CHENG Shu-sen,DU Peng-yu.Measurement of Charge Level and Formation of Terrace for Bell-Less Top of Blast Furnace[J].Journal of Iron and Steel Research,2012,24(3):58-62. |
| |
| Authors: | TENG Zhao-jie CHENG Shu-sen DU Peng-yu |
| |
| Affiliation: | 1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China ;2. MCC Capital Engineering and Research Incorporation Limited, Beijing 100176, China |
| |
| Abstract: | Based on the particle movement mathematical model and the repose angle of burden in the BF,the mathematical model of charge level was set up.In order to get the charge level and thickness of burden layers directly,a new method was presented to measure the charge level by laser equipment.The charge level of some 2 580 m3 blast furnace was measured through using this method mentioned above,and the relationship between terrace of charge level and different burden distribution matrix was obtained. |
| |
| Keywords: | charge level terrace burden distribution matrix |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《钢铁研究学报》浏览原始摘要信息 |
|
点击此处可从《钢铁研究学报》下载全文 |
|
