首页 | 本学科首页   官方微博 | 高级检索  
     

球团矿氧化焙烧试验研究
引用本文:方觉,宋建新,高艳甲,李金龙,张波.球团矿氧化焙烧试验研究[J].钢铁研究,2012,40(4):11-13,39.
作者姓名:方觉  宋建新  高艳甲  李金龙  张波
作者单位:1. 河北联合大学冶金与能源学院,河北唐山,063009
2. 河北联合大学冶金与能源学院,河北唐山063009/河北钢铁集团公司宣化钢铁公司,河北宣化075100
摘    要:为了确定氧化球团的单球抗压强度与焙烧温度和焙烧时间之间的关系,对某球团厂配矿进行了试验研究。确定了给定条件下几种配矿方案的最低焙烧温度,得到的3种配矿方案及2种对比方案的Tm(球团矿达到某一单球抗压强度时竖炉高温区的最低温度)约为1 000~1 200℃。同时给出使用2号方案配矿(60%高钛精粉,37%低钛精粉)抗压强度达到2 000N时的焙烧温度区间为1 113~1 140℃。

关 键 词:球团矿  抗压强度  氧化焙烧

A study of pellet oxidizing roasting
FANG Jue,SONG Jian-xin,GAO Yan-jia,LI Jin-long,ZHANG Bo.A study of pellet oxidizing roasting[J].Research on Iron and Steel,2012,40(4):11-13,39.
Authors:FANG Jue  SONG Jian-xin  GAO Yan-jia  LI Jin-long  ZHANG Bo
Affiliation:1. Metallurgy and Energy College, Hebei United University , Tangshan 063009, China; 2. Xuanhua Iron and Steel Company, Hebei Iron and Steel Group, Xuanhua 075100, China)
Abstract:This study is aimed to ascertain the relationship between compressive strength of single pellet and roasting temperature as well as roasting time. Through a series of experiments carried out in a pellet plant, the minimum rosting temperature under given conditions for three kinds of ore mix scheme and two kinds of compared scheme are determined. The index Tin, which refers to the Minimum temperature in high temperature zone of shaft furnace to get a given stength for a single pellet, is determined to be 1 000 -1 200 ℃ . In addition, for the No. 2 ore mix scheme (60% high titanum ores, 37 % low titanum ores ), the roasting temperature range is determined to be 1 113-1 140℃ to get a strengh of 2 000 N.
Keywords:pellet  compressive strength oxidizing roasting
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号