| 超塑性奥氏体-铁素体双相不锈钢00Cr25Ni7Mo3N的研制 |
| |
| 引用本文： | 张兰,王立新,任学平. 超塑性奥氏体-铁素体双相不锈钢00Cr25Ni7Mo3N的研制[J]. 特殊钢, 2005, 26(6): 44-46 |
| |
| 作者姓名： | 张兰 王立新 任学平 |
| |
| 作者单位： | 太原钢铁(集团)公司，太原030003;北京科技大学材料科学与工程学院，北京100083 |
| |
| 摘 要： | 通过电弧炉-电渣重熔工艺开发研制了成分为(%):0.021C,24.16Cr,7.21Ni,2.87Mo,0.17N,0.48Cu超塑性双相不锈钢00Cr25Ni7Mo3N。试验结果表明,00Cr25Ni7Mo3N超塑性双相不锈钢的耐孔蚀性和耐缝隙腐蚀性远高于传统的304L和316L奥氏体不锈钢。在变形温度960℃、应变速率2×10-3/s时,00Cr25Ni7Mo3N超塑性双相不锈钢的最高延伸率为960%,该钢超塑性变形的均匀性优于TC4钛合金,可显著减轻构件的重量。
|
| 关 键 词： | 超塑性 双相不锈钢 耐蚀性 |
| 收稿时间： | 2005-07-07 |
| 修稿时间： | 2005-07-07 |
Development of Superplastic Duplex Austenitic-Ferritic Stainless Steel 00Cr25Ni7Mo3N |
| |
| Zhang Lan,Wang Lixin,Ren Xueping. Development of Superplastic Duplex Austenitic-Ferritic Stainless Steel 00Cr25Ni7Mo3N[J]. Special Steel, 2005, 26(6): 44-46 |
| |
| Authors: | Zhang Lan Wang Lixin Ren Xueping |
| |
| Affiliation: | Taiyuan Iron and Steel(Group)Co Ltd,Taiyuan 030003；Material Science and Technology School,University of Science and Technology,Beijing 100083 |
| |
| Abstract: | The superplastic duplex austenitic-ferritic stainless steel-0.021C,24. 16Cr,7.21Ni,2.87Mo,0. 17N, 0.48Cu has been developed by arc furnace + electroslag remelting process. The test results showed that the pitting erosion resistance and the crevice corosion resistance of superplastic duplex stainless steel 00Cr25Ni7Mo3N were much more higher than that of traditional austenite stainless steel 304L and 316L. The maximum elongation of superplastic duplex stainless steel 00Cr25Ni7Mo3N at 960℃ with strain rate 2×10-³/s was 960%,and the uniformity during superplastic deformation of the duplex steel was higher than that of titanium alloy TC4 to obviously decrease the weight of component. |
| |
| Keywords: | Superplasticity Duplex Stainless Steel Corrosion Resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
