首页 | 本学科首页   官方微博 | 高级检索  
     

反应等离子喷涂TiC/Fe涂层的摩擦磨损性能研究
引用本文:张守全,朱警雷,黄继华,王海涛,张华,赵兴科. 反应等离子喷涂TiC/Fe涂层的摩擦磨损性能研究[J]. 材料工程, 2009, 0(7)
作者姓名:张守全  朱警雷  黄继华  王海涛  张华  赵兴科
作者单位:1. 北京科技大学,材料科学与工程学院,北京,100083;厦门金鹭特种合金有限公司,福建,厦门,361006
2. 北京科技大学,材料科学与工程学院,北京,100083
基金项目:焊接国家重点实验室开放资助项目,河南杰出人才创新基金 
摘    要:采用等离子喷涂前驱体热分解技术制备的Fe-Ti-C系反应热喷涂粉末,在低碳钢基体上沉积TiC/Fe金属陶瓷复合涂层.利用SEM和X射线衍射仪对涂层的显微组织结构、磨损表面及其相组成进行分析;采用SRV型往复式摩擦磨损试验机评价喷涂涂层的摩擦磨损性能.结果表明: TiC理论含量为53%(质量分数)TiC/Fe金属陶瓷涂层的耐磨粒磨损性能较好,相比基体提高了约25倍;反应等离子喷涂TiC/Fe陶瓷涂层的磨损机制主要为粘着磨损和轻微的剥落.

关 键 词:反应等离子喷涂  碳化钛  摩擦磨损性能

Tribological Performance of TiC/Fe Coatings Fabricated by Reactive Plasma Spray
ZHANG Shou-quan,ZHU Jing-lei,HUANG Ji-hua,WANG Hai-tao,ZHANG Hua,ZHAO Xing-ke. Tribological Performance of TiC/Fe Coatings Fabricated by Reactive Plasma Spray[J]. Journal of Materials Engineering, 2009, 0(7)
Authors:ZHANG Shou-quan  ZHU Jing-lei  HUANG Ji-hua  WANG Hai-tao  ZHANG Hua  ZHAO Xing-ke
Abstract:TiC reinforced Fe-based cermet coatings have been deposited on the mild steel substrate by reactive plasma spraying using Fe-Ti-C powder prepared by a precursor pyrolysis process. Microstructure, phase composition and wear surface of the coatings were examined by means of scanning electron microscopy and X-ray diffraction. Friction and wear test of TiC/Fe coatings and substrate were investigated by SRV abrasive tester. The results show that the TiC / Fe cermet coatings with 53%(mass fraction)TiC ceramic phases exhibited better abrasive wear resistance and about 25 times higher than that of the 45 mild steel. The adhesive wear and micro-spalling are the major wear mechanism of the TiC/Fe coatings fabricated by reactive plasma spraying.
Keywords:reactive plasma spraying  TiC  friction and wear behavior
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号