增强反应注射成型聚氨酯及其性能研究 |
| |
引用本文: | 王士才,李宝霞.增强反应注射成型聚氨酯及其性能研究[J].工程塑料应用,1997,25(1):25-30. |
| |
作者姓名: | 王士才 李宝霞 |
| |
作者单位: | 青岛大学组织工学院 266071
(王士才),青岛大学组织工学院 266071(李宝霞) |
| |
摘 要: | 以反应注射成型聚氨酯(RIM-PU)为基体树脂,研制了以玻纤增强剂的增强反应注射成型聚氨酯(RRIM-PU)材料。讨论了原材料及玻纤对RRIM-PU加工工艺及材料性能的影响。结果表明,以碳化二亚胺改性的异氰酸酯(CM-MDI)和低聚合异氰酸酯改性的异氰酸酯(PAPI)混合物与丙腈--苯乙烯接枝改性环氧乙烷封端的聚醚二元醇(APG)为主要原料,玻纤长度不大于1.5时,不仅RRIM加工工艺性好,而且R
|
关 键 词: | 聚氨酯 成型 性能 注塑成型 |
STUDY ON RRIM--PU AND ITS PROPERTIES |
| |
Affiliation: | Qingdao University 266071 |
| |
Abstract: | RRIM - PU had been developed with glass fiber as reinforcement and RIM - PU as matrix.Discuss the effect of RIM - PU raw materials and reinforcement on the processing and material properties of RRIM -PU.The results show that the processing property of RRIM -PU is not only good.with CM -MDI/ PAPI blend and APG being as raw materials and GF length being no more than I.5 mm,but the mechanical properties and thermal stability are excellent,and the properties of RRIM - PU is obviously increased especially than RIM-PU. |
| |
Keywords: | polyurethane RRIM RIM glass fiber property |
本文献已被 CNKI 维普 等数据库收录! |