| 1Cr12Ni3Mo2VN耐热钢的回火工艺 |
| |
| 引用本文： | 谢学林,杨钢,陈庚,傅骏,雍歧龙.1Cr12Ni3Mo2VN耐热钢的回火工艺[J].钢铁研究学报,2017,29(2):156-160. |
| |
| 作者姓名： | 谢学林 杨钢 陈庚 傅骏 雍歧龙 |
| |
| 作者单位： | 1. 四川工程职业技术学院材料工程系,四川 德阳,618000;2. 钢铁研究总院特殊钢研究所,北京,100081 |
| |
| 摘 要： | 利用金相显微镜、扫描电镜和透射电镜等研究了1Cr12Ni3Mo2VN耐热钢的回火工艺,结果指出试验钢产生第一类回火脆性的主要原因是马氏体板条界存在聚集长大的Fe_3C及M_3C脆性相,导致冲击韧性显著下降。Mo_2C与基体处于共格状态,使基体周围晶格产生很大的静畸变是次要原因;产生第二类回火脆性的原因,一是由于碳化物M_(23)C_6沿原奥氏体晶界和马氏体板条界迅速聚集并粗化,二是板条间残余奥氏体膜因碳贫化而发生热失稳分解。结合技术协议要求,为了有利于组织的稳定性,本试验钢的最佳回火工艺为580℃×2h空冷。
|
| 关 键 词： | 耐热钢 1Cr12Ni3Mo2VN 回火工艺 回火脆性 |
Temper technics of heat-resistant steel 1Cr12Ni3Mo2VN |
| |
| XIE Xue-lin,YANG Gang,CHEN Geng,FU Jun,YONG Qi-long.Temper technics of heat-resistant steel 1Cr12Ni3Mo2VN[J].Journal of Iron and Steel Research,2017,29(2):156-160. |
| |
| Authors: | XIE Xue-lin YANG Gang CHEN Geng FU Jun YONG Qi-long |
| |
| Affiliation: | 1. Department of Materials Engineering, Sichuan Engineering Technical College, Deyang 618000, Sichuan,China ;2. Institute for Special Steel, Central Iron and Steel Research Institute, Beijing 100081, China |
| |
| Abstract: | The temper technics of heat-resistant steel 1Cr12Ni3Mo2VN was investigated by metalloscopy,SEM and TEM.The results show that a large number of carbide Fe3 C and M3 C growing along the martensite lath border is the main reason that caused No.1 temper embrittlement,the static distortion caused by Mo2 C and matrix in a co-herent state is secondary reason;a large number of carbide M23 C6 growing together along austenitic grain bounda-ry and the martensite lath border and the thermal decomposition of retained austenite are the main reasons for the No.2 temper embrittlement.Combined with the technical agreement requirements,in order to benefit the stability of organization,the optimal temper technics is 580℃×2 h by air cooling. |
| |
| Keywords: | heat-resistant steel 1Cr12Ni3Mo2VN temper technic temper embrittlement |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《钢铁研究学报》浏览原始摘要信息 |
|
点击此处可从《钢铁研究学报》下载全文 |
|
