首页 | 本学科首页   官方微博 | 高级检索  
     

双曲抛物面鞍形屋面风压分布的实验研究
引用本文:赵臣,陆钦年,沈世钊.双曲抛物面鞍形屋面风压分布的实验研究[J].哈尔滨建筑大学学报,1991(1).
作者姓名:赵臣  陆钦年  沈世钊
作者单位:哈尔滨建筑工程学院金属结构研究室 (赵臣),哈尔滨建筑工程学院工理所 (陆钦年),哈尔滨建筑工程学院金属结构研究室(沈世钊)
摘    要:本文根据双曲抛物面鞍形屋面模型的风洞实验,得到了风压分布系数的初步结果.实验是分别在模拟的大气边界层和均匀流两种流场中进行的.我们根据不同风向作用下屋面风压的实测分布规律,给出了最大风压系数和整个屋面的平均风压系数.另外还就不同矢跨比(F/L=1/10~1/20)的模型进行了实验.由这些实验结果表明,风向对屋面风压分布起着最为重要的作用.在所研究的矢跨比范围内,最大风压系数C_P=-4.6q,最大平均风压系数(绝对值)(?)_p=-0.75q(q 为速压).

关 键 词:金属结构  风压力  屋盖结构  风洞

Wind Pressure Distrbution on Hyperbolic Paraboloid Shell Roofs
Zhao Chen Lu Qinnian Shen Shizhao.Wind Pressure Distrbution on Hyperbolic Paraboloid Shell Roofs[J].Journal of Harbin University of Civil Engineering and Architecture,1991(1).
Authors:Zhao Chen Lu Qinnian Shen Shizhao
Affiliation:Zhao Chen Lu Qinnian Shen Shizhao
Abstract:Wind pressure distribution was investigated on the hyperbolic paraboloid(H.P.)shaped shell roofs by model test in the wind tunnel with smooth flow and tur-bulent flow.Wind pressure distribution and the contours of wind pressure on shellroofs were determined for various wind directions.The average suctions of the roofswere computed.The effects of the rate of sag and span on the pressure distributionwere studied by a series of models.It was concluded that the wind direction wasthe most important factor that affects the wind pressure distribution on H.P.-shaped shell roofs.The highest point suction encountered was -4.6q while themaximum average suction on the roof was -0.75q.
Keywords:metal structure  wind pressure  roof structure  wind tunnds  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号