| 基于SolidWorks的摆动式生物反应器三维建模与仿真 |
| |
| 引用本文： | 邢鸿雁,刁兆亮. 基于SolidWorks的摆动式生物反应器三维建模与仿真[J]. 天津轻工业学院学报, 2011, 0(4): 70-73 |
| |
| 作者姓名： | 邢鸿雁 刁兆亮 |
| |
| 作者单位： | 天津科技大学机械工程学院,天津300222 |
| |
| 基金项目： | 天津市科技计划资助项目（10ZCKFNC01900） |
| |
| 摘 要： | 设计了一种摆动式固态生物反应器，利用SolidWorks软件分别对其主要部件罐体、凸轮、联轴器和轴进行实体建模，在SolidWorks软件中完成虚拟装配、动画制作；应用COSMOSMotion插件对设计的摆动式生物反应器进行运动仿真分析，模拟实际运行状况．仿真表明：生物反应器结构设计合理，凸轮设计的理论值与实际值一致．
|
| 关 键 词： | 生物反应器 三维建模 SolidWorks 运动仿真 COSMOSMotion |
Three-Dimensional Modeling and Simulation of Swing Bioreactor Based on SolidWorks |
| |
| X,NG Hong-yan,DIAO Zhao-liang. Three-Dimensional Modeling and Simulation of Swing Bioreactor Based on SolidWorks[J]. Journal of Tianjin University of Light Industry, 2011, 0(4): 70-73 |
| |
| Authors: | X NG Hong-yan DIAO Zhao-liang |
| |
| Affiliation: | (College of Mechanical Engineering, Tianjin University of Science ＆ Technology, Tianjin 300222, China) |
| |
| Abstract: | A swing bioreactor was developed, and the tank, cam, coupling and shafts were modeled by using SolidWorks, respectively, the virtual assembly and computer animation were carried out in SolidWorks too. At the same time, the movement of the swing bioreactor was simulated by using analysis software named COSMOSMotion, it simulated the practical running situations. Simulation results showed that the structure of the bioreactor designed is reasonable, the theoretical value of the designed cam consistent with the actual value. |
| |
| Keywords: | bioreactor three-dimensional modeling SolidWorks movement simulation COSMOSMotion |
| 本文献已被 维普 等数据库收录！ |
