Heat Transfer between Casting and Die during High Pressure Die Casting Process of AM50 Alloy-Modeling and Experimental Results |
| |
Authors: | Zhipeng GUO Shoumei XIONG Sang-Hyun Cho Jeong-Kil Choi |
| |
Affiliation: | Key Laboratory for Advanced Manufacturing by Materials Processing Technology, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China |
| |
Abstract: | A method based on die casting experiments and mathematic modeling is presented for the determination of the heat flow density (HFD) and interfacial heat transfer coefficient (IHTC) during the high pressure die casting (HPDC) process. Experiments were carried out using step shape casting and a commercial magnesium alloy, AM50. Temperature profiles were measured and recorded using thermocouples embedded inside the die.Based on these temperature readings, the HFD and IHTC were successfully determined and the calculation results show that the HFD and IHTC at the metal-die interface increases sharply right after the fast phase injection process until approaching their maximum values, after which their values decrease to a much lower level until the dies are opened. Different patterns of heat transler behavior were found between the die and the castingat different thicknesses. The thinner the casting was, the more quickly the HFD and IHTC reached their steady states. Also, the values for both the HFD and IHTC values were different between die and casting at different thicknesses. |
| |
Keywords: | Interfacial heat transfer coefficient High pressure die casting process AM50 Magnesium alloy |
本文献已被 维普 万方数据 等数据库收录! |
| 点击此处可从《材料科学技术学报》浏览原始摘要信息 |
|
点击此处可从《材料科学技术学报》下载全文 |
|