首页 | 本学科首页   官方微博 | 高级检索  
     

水下爆炸冲击波载荷作用下船底板架的塑性动力响应
引用本文:方斌,朱锡,张振华.水下爆炸冲击波载荷作用下船底板架的塑性动力响应[J].哈尔滨工程大学学报,2008,29(4):326-331.
作者姓名:方斌  朱锡  张振华
作者单位:海军工程大学,船舶与动力学院,湖北武汉430033
摘    要:为研究水面舰船结构抗水下爆炸的能力,建立了典型水面舰艇底部板架结构在水下爆炸冲击波作用下的塑性动力响应计算模型.模型以能量法为基础,将底部板架的响应过程分成整体变形和局部变形2个部分,根据两者的不同特点,分别采用骨架梁模型和固支矩形板模型进行计算,并引入能量分配机制,对两者所吸收的能量进行分配.为验证理论模型,建立了船底板板架的有限元模型,采用MSC.Dytran进行数值模拟,结果吻合较好.该计算模型可为水面舰艇船体典型结构抗冲击性能评估提供一定的依据.

关 键 词:爆炸力学  结构响应  水下爆炸  水下爆炸冲击波  船底板架  数值模拟
文章编号:1006-7043(2008)04-0326-06
修稿时间:2007年3月14日

Plastic dynamic response of ship hull grillage to underwater blast loading
FANG Bin,ZHU Xi,ZHANG Zhen-hua.Plastic dynamic response of ship hull grillage to underwater blast loading[J].Journal of Harbin Engineering University,2008,29(4):326-331.
Authors:FANG Bin  ZHU Xi  ZHANG Zhen-hua
Abstract:To investigate the anti-shock capacity of warships,a plastic dynamic response model of ship hull grillage subjected to underwater blast loading was established using the energy method.The response of hull grillage was divided into two parts: total deformation and local deformation.To calculate the maximum deflection of hull grillage,a framework beam model and a clamped squared plate model were derived separately,and an energy distribution mechanism was also introduced.To verify this method,an FEM model for ship hull grillage was built,and a numerical solution derived using MSC.Dytran software.Simulation results agreed well with theoretical predictions,showing that this method is feasible and can be used to evaluate the anti-shock capacity of warships.
Keywords:explosion mechanics  structural response  underwater explosion  underwater shock wave  ship bottom grillage  numerical simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号