| 再制造全断面隧道掘进机刀盘多元损伤探究 |
| |
| 引用本文： | 柴保明,白岩龙,刘建琴,李路路. 再制造全断面隧道掘进机刀盘多元损伤探究[J]. 河北工程大学学报(自然科学版), 2017, 34(2): 109-112 |
| |
| 作者姓名： | 柴保明 白岩龙 刘建琴 李路路 |
| |
| 作者单位： | 河北工程大学 机械与装备工程学院, 河北 邯郸 056038;河北工程大学 机械与装备工程学院, 河北 邯郸 056038;天津大学 机械工程学院, 天津 300072;河北工程大学 机械与装备工程学院, 河北 邯郸 056038 |
| |
| 基金项目： | 国家自然科学基金资助项目（51275339，51675374） |
| |
| 摘 要： | 为解决国内大量全断面隧道掘进机(TBM)未能全寿命使用,以及损伤修复相关问题。通过查阅国内外文献资料,分析TBM刀盘疲劳、磨损、蠕变、断裂等因素的影响程度,研究刀盘微观裂纹扩展机理,结合TBM刀盘特定服役环境(地质参数、结构参数、操作参数等)构建多元损伤模型,从再制造刀盘方面提出了多元损伤耦合框架。
|
| 关 键 词： | TBM刀盘 微观损伤 多元损伤 再制造 |
| 收稿时间： | 2017-04-21 |
Research on multiple damage of remanufacturing TBM cutterhead |
| |
| CHAI Baoming,BAI Yanlong,LIU Jianqin and LI Lulu. Research on multiple damage of remanufacturing TBM cutterhead[J]. Journal of Hebei University of Engineering(Natural Science Edition), 2017, 34(2): 109-112 |
| |
| Authors: | CHAI Baoming BAI Yanlong LIU Jianqin LI Lulu |
| |
| Affiliation: | College of Mechanical and Equipment Engineering, Hebei University of Engineering, Hebei Handan 056038, China;College of Mechanical and Equipment Engineering, Hebei University of Engineering, Hebei Handan 056038, China;School of Mechanical Engineering, Tianjin University, Tianjin 300072, China;College of Mechanical and Equipment Engineering, Hebei University of Engineering, Hebei Handan 056038, China |
| |
| Abstract: | This paper is to solve the problem that the large number of full face tunnel boring machine (TBM) can not be used in the whole life, as well as the related problems of damage repair. By reviewing the literature at home and abroad, we analyze the influence of TBM cutter wear, fatigue, creep, fracture and other factors, the micro crack propagation mechanism of cutter. The multiple damage model under TBM specific service environment (operating parameters of geological parameters, structure parameters, etc.) is built. In this paper, the multiple damage coupling framework is put forward from the aspect of remanufacturing cutter head. |
| |
| Keywords: | TBM cutter head Microscopic damage Multiple damage Remanufacturing |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《河北工程大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《河北工程大学学报(自然科学版)》下载全文 |
|
