首页 | 本学科首页   官方微博 | 高级检索  
     

无机抗菌聚丙烯的制备及其性能影响因素
引用本文:陈君丽1 a,2,王睿1 b,李凤琪1 a,2. 无机抗菌聚丙烯的制备及其性能影响因素[J]. 石化技术与应用, 2023, 0(3): 165-169. DOI: DOI:10.19909/j.cnki.ISSN1009-0045.2023.03.0165
作者姓名:陈君丽1 a  2  王睿1 b  李凤琪1 a  2
作者单位:(1.中国石油独山子石化公司 a.研究院;b.安全质量环保处,新疆 克拉玛依 833699;2.新疆橡塑材料实验室,新疆 克拉玛依 833699)
摘    要:采用抗冲聚丙烯和Zn系无机抗菌剂KJZ-Zn,经熔融共混制备出抗菌聚丙烯,研究了所得抗菌聚丙烯的热力学性能、力学性能、抗菌性能及其抗菌持久性的影响因素。结果表明:添加KJZ-Zn无机抗菌剂,对聚丙烯制品的热力学性能及力学性能变化均无明显的影响;当KJZ-Zn抗菌剂添加质量分数为0.3%时,经母料添加法所制备的抗菌聚丙烯,不仅加工经济性能较好,而且对金黄色葡萄球菌、大肠埃希氏菌的抗细菌率均大于98.0%,抗菌性能不低于Ⅱ级;为保证其抗菌性能的持久性,在使用时,既不要长时间浸泡于水中,又要尽量减少清洗次数。

关 键 词:Zn系无机抗菌剂  聚丙烯  抗菌聚丙烯  母粒添加法  抗菌性能

Preparation of inorganic antibacterial polypropylene and factorsaffecting its properties
CHEN Jun-Li1 a,2,WANG Rui1 b,LI Feng-Qi1 a,2. Preparation of inorganic antibacterial polypropylene and factorsaffecting its properties[J]. Petrochemical Technology & Application, 2023, 0(3): 165-169. DOI: DOI:10.19909/j.cnki.ISSN1009-0045.2023.03.0165
Authors:CHEN Jun-Li1 a  2  WANG Rui1 b  LI Feng-Qi1 a  2
Affiliation:(1.a.Research Institute;b.Safety,Quality and Environmental Protection Division of Dushanzi Petrochemical Company,PetroChina,Karamay 833699,China; 2. Xinjiang Laboratory of Rubber-Plastic Materials,Karamay 833699,China)
Abstract:Antibacterial polypropylene was prepared by melt blending of impact resistant polypropylene and KJZ-Zn in the Zn based inorganic antibacterial agent. The factors affecting the thermodynamic properties,mechanical properties, antibacterial properties,and antibacterial durability of the obtained antibacterial polypropylene were studied. The results showed that the addition of KJZ-Zn inorganic antibacterial agent had no significant impact on the thermodynamic and mechanical properties of polypropylene products. When the mass fraction of antibacterial agent added to KJZ-Zn was 0.3%,the antibacterial polypropylene prepared by the master batch addition method not only had the better economic processing performance,but also had the antibacterial rate of more than 98.0% against Staphylococcus aureus and Escherichia coli,with the antibacterial performance of no less than Ⅱ Level. To ensure the durability of its antibacterial properties,it was necessary not only don′t to immerse it in water for a long time,but also to minimize the cleaning frequency when using.
Keywords:Zn series inorganic antibacterial agent  polypropylene  antibacterial polypropylene  master batch addition method  antibacterial properties
点击此处可从《石化技术与应用》浏览原始摘要信息
点击此处可从《石化技术与应用》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号