首页 | 本学科首页   官方微博 | 高级检索  
     

烧结熔剂高温特性的实验研究
引用本文:祁成林,张建良,陈永星,郭豪. 烧结熔剂高温特性的实验研究[J]. 过程工程学报, 2009, 9(Z1)
作者姓名:祁成林  张建良  陈永星  郭豪
作者单位:北京科技大学冶金与生态工程学院,北京,100083
基金项目:国家重点基础研究发展规划(973计划) 
摘    要:利用ZDHR-3型微机灰熔融性测定仪和综合热分析仪研究了常用的7种烧结熔剂在烧结过程中的高温反应特性及热分解特性.测定了模拟烧结矿在配加7种熔剂的矿粉的变形温度、软化温度、半球温度和流动温度,以及7种烧结熔剂的分解率与分解温度.结果表明,烧结过程中,7种熔剂的分解温度在1215℃及1250℃左右:相比于其他5种熔剂,白云石A、B的流动性较差;7种熔剂的分解失重率分为"一段式失重"和"两段式失重"两种,前者失重温度区间在690~810℃,而后者在400~460℃及610~710℃,且前者大于后者;两种白云石和石灰石的失重率最大,烧损也最大.

关 键 词:烧结  熔剂  反应性  分解特性

Experimental Study on High Temperature Characteristics of Sintering Fluxes
QI Cheng-lin,ZHANG Jian-liang,CHEN Yong-xing,GUO Hao. Experimental Study on High Temperature Characteristics of Sintering Fluxes[J]. Chinese Journal of Process Engineering, 2009, 9(Z1)
Authors:QI Cheng-lin  ZHANG Jian-liang  CHEN Yong-xing  GUO Hao
Affiliation:School of Metallurgical and Ecological Engineering;University of Science & Technology Beijing;Beijing 100083;China
Abstract:High temperature reactivity and thermal decomposition characteristics of seven commonly used sintering fluxes were studied by ZDHR-3 ash-fusibility and comprehensive thermal analyzers. When the sinter was proportioned with the seven fluxes respectively, deformation temperature, soften temperature, hemisphere temperature and flowing temperature as well as decomposition rate and decomposition temperature were examined. The result showed that during the sintering process, the decomposition of flux began at the...
Keywords:sintering  flux  reactivity  decomposition characteristics  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号