| 阻尼器试验台架液压夹紧装置的分析设计 |
| |
| 引用本文： | 刘银水,廖义德,姜静,唐群国. 阻尼器试验台架液压夹紧装置的分析设计[J]. 武汉理工大学学报, 2007, 29(7): 110-113 |
| |
| 作者姓名： | 刘银水 廖义德 姜静 唐群国 |
| |
| 作者单位： | 1. 华中科技大学机械学院,武汉,430074
2. 武汉工程大学机电学院,武汉,430073 |
| |
| 摘 要： | 应用有限元方法对所设计的阻尼器试验台的液压夹紧装置进行了分析，在此基础上校核了夹紧装置的强度，分析了液压力、横梁与导向柱配合间隙等因素对夹紧力的影响。试验结果表明，设计达到了使用要求，同时理论分析与试验结果比较吻合。
|
| 关 键 词： | 阻尼器 试验台 液压夹紧 有限元 |
| 文章编号： | 1671-4431（2007）07-0110-04 |
| 修稿时间： | 2007-04-19 |
Analysis and Design of the Hydraulic Clamp Assembly in a Test Bench of the Damper |
| |
| LIU Yins-hui,LIAO Yi-de,JIANG Jing,TANG Qun-guo. Analysis and Design of the Hydraulic Clamp Assembly in a Test Bench of the Damper[J]. Journal of Wuhan University of Technology, 2007, 29(7): 110-113 |
| |
| Authors: | LIU Yins-hui LIAO Yi-de JIANG Jing TANG Qun-guo |
| |
| Affiliation: | 1. School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074; 2. School of Mechanical Engineering, Wuhan Institute of Technology, Wuhan 430073, China |
| |
| Abstract: | The analysis and design of the hydraulic clamp assemlby in a test bench of the damper is completed by using the Finite Element Method. Based on this, the strength of the hydraulic clamp assembly is verified and the influences of the hydraulic pressure, the clearance between the beam and the guiding pole on the clamp force are analyzed. Test results show that the design meets the usage requirements and the theoretical analysis is well in accordance with experimental results. |
| |
| Keywords: | damper test bench hydraulic clamp finite element method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
