| 基于DEFORM的挤压模具模块化分析系统开发 |
| |
| 引用本文： | 徐岩,贾建波,李冬梅,陆美玲,杨啸天,王东博.基于DEFORM的挤压模具模块化分析系统开发[J].吉林化工学院学报,2011(9):72-75,88. |
| |
| 作者姓名： | 徐岩 贾建波 李冬梅 陆美玲 杨啸天 王东博 |
| |
| 作者单位： | 北华大学机械工程学院; |
| |
| 基金项目： | 全国大学生创新性实验计划项目(091020111) |
| |
| 摘 要： | 以典型棒材的正挤压成形工艺优化为例,通过Deform前处理数据模块的二次开发,编译完成外部C#语言程序,以Visual Studio 2010为调试工具,完成程序调试,实现了正挤压成形过程中多组工艺参数的快速模拟优化.阐明Deform前处理数据模块二次开发流程,证实该方法能够有效的提高挤压成形工艺优化的效率,是在生产前确定挤压工艺的低时耗、低成本的有效途径.
|
| 关 键 词： | 正挤压 DEFORM 前处理数据模块 二次开发 外部程序 |
Development of the modular analysis system for the extrusion die based on EFORM |
| |
| XU Yan,JIA Jian-bo,LI Dong-mei,LU Mei-ling,YANG Xiao-tian,WANG Dong-bo.Development of the modular analysis system for the extrusion die based on EFORM[J].Journal of Jilin Institute of Chemical Technology,2011(9):72-75,88. |
| |
| Authors: | XU Yan JIA Jian-bo LI Dong-mei LU Mei-ling YANG Xiao-tian WANG Dong-bo |
| |
| Affiliation: | XU Yan,JIA Jian-bo,LI Dong-mei,LU Mei-ling,YANG Xiao-tian,WANG Dong-bo(College of Mechanical Engineering,Beihua University,Jilin City 132021,China) |
| |
| Abstract: | Taking the typical process optimization of bar forward extrusion as an example,fast simulation and optimization of multiple group process parameters are realized by secondary development of pre-processing data module and external C# program.Visual Studio 2010 is adopted as a debugging tool to complete the program debugging.Secondary development process of pre-processing data module confirms that this method is an effective way which can effectively improve the efficiency of extrusion forming optimization an... |
| |
| Keywords: | forward extrusion DEFORM pre-processing data module secondary development external program |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
