| 酰氯化法合成乙撑双硬脂酰胺的工艺研究 |
| |
| 引用本文： | 金朝辉,高华晶,李春华,张淋,彭川. 酰氯化法合成乙撑双硬脂酰胺的工艺研究[J]. 吉林化工学院学报, 2011, 0(11): 14-16 |
| |
| 作者姓名： | 金朝辉 高华晶 李春华 张淋 彭川 |
| |
| 作者单位： | 吉林化工学院化工与材料工程学院;中石油东北炼化工程有限公司吉林设计院;吉林大学环境与资源学院; |
| |
| 摘 要： | 以硬脂酸、二氯亚砜和乙二胺为原料，经酰氯化反应和酰胺化反应合成了乙撑双硬脂酰胺，考察了反应温度、反应时间和原料配比对反应的影响．得到了较佳的实验条件：酰氯化反应温度80℃、反应时间2．5h，酰胺化反应温度95℃、反应时间1．2h，硬脂酰氯和乙二胺的摩尔比3：1时，乙撑双硬脂酰胺的收率达到了93．2％．
|
| 关 键 词： | 乙二胺 硬脂酸 硬脂酰氯 乙撑双硬脂酰胺 |
Synthesis of ethylene bisstearamide by chlorization method |
| |
| JIN Zhao-hui,GAO Hua-jing,LI Chun-hua,,ZHANG Lin,PENG Chuan. Synthesis of ethylene bisstearamide by chlorization method[J]. Journal of Jilin Institute of Chemical Technology, 2011, 0(11): 14-16 |
| |
| Authors: | JIN Zhao-hui GAO Hua-jing LI Chun-hua ZHANG Lin PENG Chuan |
| |
| Affiliation: | JIN Zhao-hui1,GAO Hua-jing1,LI Chun-hua2,3,ZHANG Lin1,PENG Chuan1 (1.College of Chemical and Materials Engineering,Jilin Institute of Chemical Technology,Jilin City 132022,China,2.Jilin Design Institute,PetroChina Northeast Refining & Petrochemical Engineering Co.Ltd,Jilin City 132002,3.College of Environment and Resources,Jilin University,Changchun 130026,China) |
| |
| Abstract: | Ethylene bisstearamide was prepared by the reactions of chloridization and amidation with stearic acid, thionyl chloride and ethylenediamine as raw materials. Influence of reaction temperature, reaction time and ratio of raw materials were discussed. The experimental results showed that the yield of ethylene bisstear- amide is up to 93.2% under the optimal reaction conditions of chloridization temperature 80 ℃, chloridization time 2.5 h, amidation temperature 95 ℃, amidation time 1.2 h, and stearic chloride to ethylenediamine mole ratio of 3 ： 1. |
| |
| Keywords: | ethylenediamine stearic acid stearoyl chloride ethylene bisstearamide |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
