| 拉深筋成形二维弹塑性有限元数值模拟 |
| |
| 引用本文： | 杨玉英,金朝海,王荣芳,邢忠文.拉深筋成形二维弹塑性有限元数值模拟[J].塑性工程学报,2001,8(1):31-34. |
| |
| 作者姓名： | 杨玉英 金朝海 王荣芳 邢忠文 |
| |
| 作者单位： | 哈尔滨工业大学 |
| |
| 摘 要： | 利用开发的拉深筋二维弹塑性有限元数值模拟软件 ,对圆形筋和矩形筋就压筋和成形的连续过程进行了数值模拟 ;分析了拉深筋主要几何参数对压筋力和拉深筋阻力的影响 ,研究了压筋和成形两个阶段板料在拉深筋作用下的变形规律与受力特点。模拟结果与实验结果吻合良好 ,为建立一种实用的等效拉深筋模型及进一步的三维拉深筋成形模拟奠定了基础。
|
| 关 键 词： | 数值模拟 拉深筋 压筋力 拉深筋阻力 |
| 修稿时间： | 1999年11月29 |
2-D ELASTO-PLASTIC FE SIMULATION OF
DRAWBEAD DRAWING PROCESS |
| |
| YANG Yu-ying,JIN Chao-hai,WANG Rong-fang,Xing Zhong-wen.2-D ELASTO-PLASTIC FE SIMULATION OF
DRAWBEAD DRAWING PROCESS[J].Journal of Plasticity Engineering,2001,8(1):31-34. |
| |
| Authors: | YANG Yu-ying JIN Chao-hai WANG Rong-fang Xing Zhong-wen |
| |
| Affiliation: | Harbin Institute of Technology 150001 |
| |
| Abstract: | The drawing process including locking and pulling phase under drawbead with circular and rectangular section shape is simulated by means of a static-implicit FE code developed by the authors for two dimensional elasto-plastic simulation of sheet metal forming.The influence of main bead geometrical parameters on binder hold down force(BHDF)and drawbead restraining force(DBRF)are analyzed.The deformation law and loading characteristics of the sheet around the drawbead are studied during the two sequential phases.And the calculated results show a good agreement with the experimental data.As a result,the investigation lays a foundation for setting up an applied drawbead model in 3-D simulation of drawbeads in the future. |
| |
| Keywords: | numerical simulation drawbead binder hold down force drawbead restraining force |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
