| 切削条件对已加工表面残留应力的影响 |
| |
| 引用本文： | 熊建武,周进. 切削条件对已加工表面残留应力的影响[J]. 硬质合金, 2005, 22(2): 74-77 |
| |
| 作者姓名： | 熊建武 周进 |
| |
| 作者单位： | 湖南铁道职业技术学院,湖南,株洲,412001 |
| |
| 基金项目： | 湖南铁道职业技术学院重点资助课题《模具磨损与润滑的机理及实验研究》(湖铁院办[2004]36号批准立项)的阶段性成果 |
| |
| 摘 要： | 用X射线应力测量仪测量了不同切削条件下铝合金工件表面的残留应力。结果表明,硬质合金刀具薄切削铝合金时,切削速度、进给量、切削深度对已加工表面残留应力的影响具有不同的规律。
|
| 关 键 词： | 铝合金 切削条件 残留应力 |
| 修稿时间： | 2005-01-20 |
Influence of Cutting Condition on the Residual Stress of Machined Surface |
| |
| Xiong Jianwu,Zhou Jin. Influence of Cutting Condition on the Residual Stress of Machined Surface[J]. Cemented Carbide, 2005, 22(2): 74-77 |
| |
| Authors: | Xiong Jianwu Zhou Jin |
| |
| Abstract: | With the X-ray stressmeasurer, the residual stress of machined surface was measured when aluminum alloy be fine-cutted by cemented carbide on different cutting condition. The result express that there are different laws of influence on the residual stress of machined surface when aluminum alloy be fine-cutted at different cutting speed,feed and cutting depth. |
| |
| Keywords: | cemented carbide aluminum alloy cutting condition residual stress |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
